Pewag Lifting magnet PMA150
Part no.: 46057489
Further information
- Load capacity (kg):
- 150
- A (mm):
- 85
- B (mm):
- 110
- C (mm):
- 155
- D (mm):
- 85
- E (mm):
- 190
- Mounting:
- AW 13: 13 x 110 x 60
- Weight (kg):
- 7
- Material thickness (mm):
- 20
- Length max. (mm):
- 2000
- Material:
- Ø 150 mm
- Technical data:
- Flat material WLL 150 kg
Round material WLL 75 kg - Description:
- 6057489.psd
- To be found in category:
- Industry & workshopWorkshop equipmentLoad chainsLifting magnets
Practical
Neodymium magnets, can therefore be used without electricity for numerous metallic materials. Load capacity from 150 kg to 1000 kg. Fixed hanging rings ensure quick and easy mounting on carrier. Can be used for flat and round material. Suitable for use at temperatures between -10°C and +80°C at humidity up to max. 80%. Maximum temperature of load to be lifted: 60°C.
Surface: Orange anodised or galvanised
Hanging rings: Orange powder-coated
Finishing according to EN 12100 T1 and T2, EN 13155, ASME B30.20 and machinery directive 2006/42/EC.
Advantages:
• Use of neodymium magnets
• Use without electricity
• Small handy design
• Can be used for various metals if load capacity reduction factors are considered
• Easy activation and deactivation by moving the lever, 180° movement results in optimum exploitation of magnetic effect
• Fixing of lever in activated position by securing mechanism means that unintentional release of the load is impossible.
• Flexible connection between hanging ring and magnet, therefore lower loading in the event of angled pulling
• Front plates aluminium, therefore low weight
Neodymium magnets, can therefore be used without electricity for numerous metallic materials. Load capacity from 150 kg to 1000 kg. Fixed hanging rings ensure quick and easy mounting on carrier. Can be used for flat and round material. Suitable for use at temperatures between -10°C and +80°C at humidity up to max. 80%. Maximum temperature of load to be lifted: 60°C.
Surface: Orange anodised or galvanised
Hanging rings: Orange powder-coated
Finishing according to EN 12100 T1 and T2, EN 13155, ASME B30.20 and machinery directive 2006/42/EC.
Advantages:
• Use of neodymium magnets
• Use without electricity
• Small handy design
• Can be used for various metals if load capacity reduction factors are considered
• Easy activation and deactivation by moving the lever, 180° movement results in optimum exploitation of magnetic effect
• Fixing of lever in activated position by securing mechanism means that unintentional release of the load is impossible.
• Flexible connection between hanging ring and magnet, therefore lower loading in the event of angled pulling
• Front plates aluminium, therefore low weight