Battery cut-off switches, electric

Key-controlled switch for disconnecting and protecting the battery and all electrical circuits in a vehicle. The version with separate coil supply allow any other circuit to be disconnected, e.g. tailboard lifters. The switches can also be used to protect cables with a large current capacity, e.g. cables for starters, electromagnetic retarders, etc.
Technical data:
Rated operating voltage: 12 V/24 V
Operating current during continuous operation: max. 250 A
Operating current during short-term operation: 2500 A for max. 5 seconds
Rated peak power input of coil: 2.6 A at 12 V, 3.2 A at 24 V
Rated peak power input of coil during normal operation: 0.4 A at 12 V, 0.3 A at 24 V
Connecting bolts M10 (galvanised brass), nuts for contacts made of brass
Operating temperature min./max.: -40°C/+85°C
Protection class: IP65 (IEC 529)

HELLA Main switch, 12 V
Version:
Battery switch, separates positive (+) and negative (-) terminal
2 x M5 solenoid, 4 x M10 battery. Continuous power rating at 12 V: 250 A
Connection thread:
2 x M5 solenoid, 4 x M10 battery
Power rating max. 12 V:
2500 A max 5 sek., Dauerbelastung 250A
Nominal voltage (V):
12
Number of pins:
2
Mounting type:
Bolted
DIN/ISO:
40050-IP65
Temperature range (°C):
-30 to 60
Show more details
HELLA Battery cut-off switch 24 V
Version:
Battery switch, separates positive (+) and negative (-) terminal
With separate solenoid, 2 x M5 solenoid / 4 x M10 battery.
Continuous power rating at 24 V: 250 A
Connection thread:
2 x M5 solenoid
Nominal voltage (V):
24
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.
HELLA Main switch, 24 V
Version:
Battery switch with separate coil
2 x M5 coil / 2 x M10 battery, continuous load at 24 V: 250 A
Connection thread:
2 x M10 battery / 2 x M5 solenoid
Nominal voltage (V):
24
HELLA Main switch, 24 V
Version:
Battery switch, separates positive (+) terminal
1 x M5 coil, 2 x M10 battery Continuous power rating at 24 V
Connection thread:
1 x M5 solenoid / 2 x M10 battery
Nominal voltage (V):
24
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.
BOSCH Battery changeover relay
Version:
Change-over relay (battery change-over switch ) for series and parallel connection of two 12 V batteries in 12 V systems with 24 V starter. For short-time operation.12 V 1500 A max. 5 sec. Mounting: 4 hole Ø 8.4 mm. Dimensions. 124 x 110 x 160 mm
Width (mm):
110
Height (mm):
160
Length (mm):
124
To fit:
DAF, Mercedes-Benz, Volvo Trucks
Current (A):
75
Housing:
Metallgehäuse
To fit as models:
F 1400, F 1600, LP, NG, O 309, O 317, N7
Replaces:
0333300001, 0333300005, 0333300006, 0333300004
Voltage (V):
12
Fixing:
4 Löcher (Ø 8,4 mm)
Bosch type:
SH/SE 11/13
Function:
Schalterfunktion: mit Startwiederholsperre, Hochleistungs-Schließer
Relaisfunktion: Batteriehauptschalter
Temperature range (°C):
von -30 bis 100
Show more details
ATTENTION: A credit note for Bosch articles can only be issued if the articles are returned unopened in the original box or in the case of an incorrect order!
Original spare part numbers are for comparison purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.