Universal motor control
GRANIT Motor control unit CEM 380
For monitoring and protecting irrigation motor pumps. Can be mounted on all stationary motors.
GRANIT Motor control unit CIM 137
For monitoring and protecting irrigation motor pumps,
With GSM module for control via app.
GRANIT Motor control unit CTR 087/0S
For monitoring and protection, for tractors in irrigation use
GRANIT Motor control unit CIM 136
For monitoring and protection of irrigation motor pumps
- CIM 136
- With GSM - manual control
- It indicates by means of SMS message that the motor pump is in alarm condition (once a phone number has been programmed)
- Possibility to display the motor pump status.
- Possibility to exclude the pump protection.
- Setting the working time in minutes.
- Setting the working pressure.
- Possibility of starting or stopping via SMS control commands.
- Possibility of starting, stopping and speed adjustment (only in connection with the Elcos actuator) via the control commands in real time.
- Controls the speed regulator of the diesel engine and keeps the system pressure constant (only in connection with the Elcos actuator)
- Controls the water flow in the pipe.
- Clock to program engine pump start and stop.
- Acceleration and deceleration are automatically adjusted when the pump starts and stops
- Freeze protection and pressure boost functions
- Digital instruments (hour meter, oil pressure gauge, oil and coolant temperature gauge , timer, pump water pressure gauge, fuel level gauge, tachometer, battery voltmeter).
- Automatic engine pump shutdown (in case of low oil pressure, over temperature, broken belt, minimum fuel level, available A1, low diesel fuel pressure, low cooling water level, insufficient pump water pressure and pump water overpressure).