TREX.PARTS FEM 4.004 Sets (UVV)
- Set consists of:
- 1x cleaner, 1x penetrant, 1x developer
- Technical data:
- Paint penetration system in spray form consisting of 3 components: Cleaner - Dye Penetrant - Developer
Application:
Can be used to find hairline and abrasion cracks and binding defects for almost all materials.
• First clean and dry the surface with the cleaning agent.
• Apply and let penetrant penetrate and then wash away any unnecessary penetrant
• Apply developer and let dry and examine surface for defects
- Set consists of:
- 1x cleaner, 1x penetrant, 1x developer, 1x UVV inspection report block, 20x basic inspection sticker, 50x inspection sticker 2025
- Technical data:
- Anyone who operates and uses industrial trucks in Germany is legally obliged to check, or have them checked, at least once a year for safety and functionality. This is because safe operation of industrial trucks is only possible by ensuring that they are in perfect technical condition.
In the past, the inspection was known as UVV or BGV inspection, but today it is carried out and documented uniformly according to FEM 4.004. A distinction is made between the small and the large inspection.
Scope of the minor inspection
The minor inspection must be carried out every 500 to 600 operating hours. The following are inspected and tested:
• Forks
• Pins
• Chassis
• Chains
Scope of the major test
The major test must be carried out after 2,000 to 2,400 operating hours or at least annually and covers the entire industrial truck including its equipment. A total of about 100 safety-relevant criteria are tested and documented, including:
• Steering
• Brakes
• Controls
• wheels
• Drive
• Hydraulic system
• Lift mast
• Lift chains
• Load handling attachment
• Overhead guard
• Seat & handholds for passengers
• Lighting system - signage
• Trailer device
• Load chart
- Set consists of:
- 1x cleaner, 1x penetrant, 1x developer, 1x UVV inspection record block, 20x basic inspection sticker, 50x inspection sticker 2025, 1x wear gauge for leaf chains, 1x wear gauge for forks
- Technical data:
- Anyone who operates and uses industrial trucks in Germany is legally obliged to check, or have them checked, at least once a year for safety and functionality. This is because safe operation of industrial trucks is only possible by ensuring that they are in perfect technical condition.
In the past, the inspection was known as UVV or BGV inspection, but today it is carried out and documented uniformly according to FEM 4.004. A distinction is made between the small and the large inspection.
Scope of the minor inspection
The minor inspection must be carried out every 500 to 600 operating hours. The following are inspected and tested:
• Forks
• Pins
• Chassis
• Chains
Scope of the major test
The major test must be carried out after 2,000 to 2,400 operating hours or at least annually and covers the entire industrial truck including its equipment. A total of about 100 safety-relevant criteria are tested and documented, including:
• Steering
• Brakes
• Controls
• wheels
• Drive
• Hydraulic system
• Lift mast
• Lift chains
• Load handling attachment
• Overhead guard
• Seat & handholds for passengers
• Lighting system - signage
• Trailer device
• Load chart
Original spare part numbers are for comparison purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.