For OMP, OMR, OMS

Multi-disc brakes are static brakes and are used for holding loads, e.g. in winches. They are not suitable as service brakes. They can easily be flanged to the corresponding hydraulic motor. A control pressure is required to open the brake and the leak oil connection must lead to the tank unpressurised (max. 0.5 bar counter pressure).
Oil quantity required to open the brake: approx. 7-8 cm³
Brake oil volume approx. 50-120 cm³
Recommended oil: mineral oil HLP (DIN 51524 ) with viscosity 20-75 mm²/s
First oil change after 50-100 operating hours, then every 500-1500 operating hours.
Radial and axial forces are only permitted to a limited extent.