ELECTROMIG SYNERGIC
Multi-process welder with inverter technology with MIG/MAG / FLUX / BRAZING / MMA and TIG DC lift with microprocessor control and wire feed with 4 rollers. Flexible use with different welding materials (steel, stainless steel, aluminium) or braze welding materials (galvanised sheets). Wide range of applications in industry, from maintenance and assembly to bodywork repairs. The synergistic adjustment allows the product to be operated easily. With Telwin ATC technology, excellent welding results can be easily achieved on thin-walled materials thanks to the sophisticated arc control.
Features:
• Manual and synergy operation.
• 30 preset synergy curves.
• MIG/MAG settings: Initial wire speed ramp, electronic reactance, wire burn-back time, gas post flow (post-gas)
• Selection of 2/4-stroke operation, spot, material thickness in inches and mm
• Thermostat protection as well as protection against overvoltage, undervoltage, overcurrent and motor generator protection (+/-15%).
• TIG lift, complete with MIG/MAG torch, earth cable and earth clamp.
- Current requirement (A):
- 10 - 15
- Technical data:
- Welding wire max. 15 kg coil:
Steel: 0.6 - 1.2 mm
Stainless steel: 0.8 - 1.2 mm
Aluminium: 0.8 - 1.2 mm
Cored wire: 0.8 - 1.2 mm
Solder wire: 0.8 - 1.2 mm - Voltage (volts/Hz):
- 400/50-60
- Control range (A):
- 20 - 300 DC
- Electrodes (mm):
- 1,6 - 6
- Current (A):
- 270 (20%) - 205 (60%)
- Dimensions L x W x H (mm):
- 280 x 880 x 800
- Weight (kg):
- 37.0
- Protection class:
- IP23
- Power consumption max. (kW):
- 6,5 - 9
- Open circuit voltage (V):
- 63
- Additional information:
- Multi-process welder with inverter technology with MIG/MAG / FLUX / BRAZING / MMA and TIG DC lift with microprocessor control and wire feed with 4 rollers. Flexible use with different welding materials (steel, stainless steel, aluminium) or braze welding materials (galvanised sheets). Wide range of applications in industry, from maintenance and assembly to bodywork repairs. The synergistic adjustment allows the product to be operated easily. With Telwin ATC technology, excellent welding results can be easily achieved on thin-walled materials thanks to the sophisticated arc control.
Properties:
• Manual and synergy operation.
• 30 preset synergy curves.
• MIG/MAG settings: initial wire speed ramp, electronic reactance, wire burn-back time, post-gas flow
• Selection of 2-/4-cycle operation, spot, material thickness in inches and mm
• Thermostat protection as well as overvoltage, undervoltage, overcurrent and motor generator protection (+/-15%)
• • TIG lift, complete with MIG/MAG torch, earth cable and earth clamp
Show more details
This item cannot be returned or cancelled as it is classed as a special order.
- Current requirement (A):
- 15 - 17
- Technical data:
- Welding wire max. 15 kg coil:
Steel: 0.6 - 1.6 mm
Stainless steel: 0.8 - 1.6 mm
Aluminium: 0.8 - 1.6 mm
Cored wire: 1.0 - 1.2 mm
Solder wire: 0.8 - 1.2 mm - Voltage (volts/Hz):
- 230/400
- Control range (A):
- 20 - 320 / 20 - 400
- Electrodes (mm):
- 1,6 - 6
- Current (A):
- 320 (20%) - 400 (30%)
- Dimensions L x W x H (mm):
- 280 x 890 x 800
- Weight (kg):
- 42.0
- Protection class:
- IP23
- Power consumption max. (kW):
- 12,6 - 16,5
- Open circuit voltage (V):
- 106 / 73
- Additional information:
- Multi-process welder with inverter technology with MIG/MAG / FLUX / BRAZING / MMA and TIG DC lift with microprocessor control and wire feed with 4 rollers. Flexible use with different welding materials (steel, stainless steel, aluminium) or braze welding materials (galvanised sheets). Wide range of applications in industry, from maintenance and assembly to bodywork repairs. The synergistic adjustment allows the product to be operated easily. With Telwin ATC technology, excellent welding results can be easily achieved on thin-walled materials thanks to the sophisticated arc control.
Properties:
• Manual and synergy operation.
• 30 preset synergy curves.
• MIG/MAG settings: initial wire speed ramp, electronic reactance, wire burn-back time, post-gas flow
• Selection of 2-/4-cycle operation, spot, material thickness in inches and mm
• Thermostat protection as well as overvoltage, undervoltage, overcurrent and motor generator protection (+/-15%)
• • TIG lift, complete with MIG/MAG torch, earth cable and earth clamp.
Show more details
This item cannot be returned or cancelled as it is classed as a special order.
Original spare part numbers are for comparison purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.