Kuhn
GRANIT Heavy Duty Scraper
Part no.:1792800009
- Width (mm):
- 90
- Length (mm):
- 125
- Hole Ø (mm):
- 13
This item cannot be returned or cancelled as it is classed as a special order.
- Thickness (mm):
- 3
- Bolts with nuts (not included in price):
- 18051-1030
GRANIT Heavy Duty Scraper
Part no.:1792800008
- Width (mm):
- 75
- Length (mm):
- 140
- Hole Ø (mm):
- 11
This item cannot be returned or cancelled as it is classed as a special order.
- Thickness (mm):
- 3
- Material:
- Advantages of chromium carbide coatings
Granit parts are coated with a special
wear protection alloy. The carrier material is an
alloy with a high chromium content and
added tungsten carbide particles.
The coating process takes place at extremely high temperatures in a controlled atmosphere.
The almost perfect cohesion between the coating with the body ensures maximum resistance and durability.
The coating is characterised by its compactness and its homogeneous surface.
The average hardness is around 600 HV with a carbide hardness between 2500 and 3000 HV.
The coating process used ensures excellent anchoring of the coating to the body.
Complete or partial detachment of the coating is almost impossible, even as a result of impacts caused by stones in the ground.
The coating not only extends the service life of the tool, but also ensures high dimensional stability as a result of the low wear, which is essential for a consistently good work result.
GRANIT Scraper
Part no.:18051-K201
- Thickness (mm):
- 5
GRANIT Scraper
Part no.:18051-K203
- Thickness (mm):
- 2
GRANIT Scraper
Part no.:56033 52528900 B
- Thickness (mm):
- 4
This item cannot be returned or cancelled as it is classed as a special order.
- Thickness (mm):
- 4
- Material:
- Advantages of chromium carbide coatings
Granit parts are coated with a special
wear protection alloy. The carrier material is an
alloy with a high chromium content and
added tungsten carbide particles.
The coating process takes place at extremely high temperatures in a controlled atmosphere.
The almost perfect cohesion between the coating with the body ensures maximum resistance and durability.
The coating is characterised by its compactness and its homogeneous surface.
The average hardness is around 600 HV with a carbide hardness between 2500 and 3000 HV.
The coating process used ensures excellent anchoring of the coating to the body.
Complete or partial detachment of the coating is almost impossible, even as a result of impacts caused by stones in the ground.
The coating not only extends the service life of the tool, but also ensures high dimensional stability as a result of the low wear, which is essential for a consistently good work result.
GRANIT replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.