DIN parts

GRANIT Mouldboard tip

GRANIT Mouldboard tip

including bolts, right

Bolts with nuts included:
2 x 18012351410
Assembly notes:
Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
GRANIT Mouldboard tip
suitable for plough body:
U 1003, U 1003 W, U 1008 W
Suitable bolts:
2x 18012351410
Assembly notes:
Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
GRANIT Mouldboard tip

GRANIT Mouldboard tip

including bolts, left

Bolts with nuts included:
2 x 18012351410
Assembly notes:
Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
GRANIT Mouldboard tip
suitable for plough body:
U 1203, U 1203 W, U 1208 W, U 1303, U 1308 W
Suitable bolts:
2x 18012351410
Assembly notes:
Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
GRANIT Mouldboard tip

GRANIT Mouldboard tip

including bolts, right

Bolts with nuts included:
2 x 18012351410
Assembly notes:
Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
GRANIT Mouldboard tip
suitable for plough body:
U 1203, U 1203 W, U 1208 W, U 1303, U 1308 W
Suitable bolts:
2x 18012351410
Assembly notes:
Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
GRANIT Mouldboard tip

GRANIT Mouldboard tip

including bolts, left

Bolts with nuts included:
2 x 18012351410
Assembly notes:
Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
GRANIT Mouldboard tip
suitable for plough body:
U 1403, U 1408 W, U 1503, U 1508 W
Suitable bolts:
2x 18012351410
Assembly notes:
Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
GRANIT Mouldboard tip

GRANIT Mouldboard tip

including bolts, right

Bolts with nuts included:
2 x 18012351410
Assembly notes:
Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
GRANIT Mouldboard tip
suitable for plough body:
U 1403, U 1408 W, U 1503, U 1508 W
Suitable bolts:
2x 18012351410
Assembly notes:
Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
GRANIT Mouldboard tip

GRANIT Mouldboard tip

including bolts, left

Bolts with nuts included:
2 x 18012351410
Assembly notes:
Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
GRANIT Mouldboard tip
suitable for plough body:
SUG 3303, SUG 3403, SUG 3403 A, SUG 3603, SUS 3603 A
Suitable bolts:
3 x 1801035HU10
Assembly notes:
Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
GRANIT replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.