Eicher

GRANIT Beak share

GRANIT Beak share

Right (3 holes)

Suitable bolts:
3x 18012351410
Assembly notes:
Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
suitable for plough body:
U 1003, U 1013, U 1203, U 1213
GRANIT Beak share

GRANIT Beak share

including bolts, right (3-hole)

Bolts with nuts included:
3 x 18012351410
Assembly notes:
Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
GRANIT Beak share

GRANIT Beak share

Left (3 holes)

Suitable bolts:
3x 18012351410
Assembly notes:
Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
suitable for plough body:
U 1003, U 1013, U 1203, U 1213
GRANIT Beak share

GRANIT Beak share

including bolts, left (3-hole)

Bolts with nuts included:
3 x 18012351410
Assembly notes:
Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
GRANIT Beak share
Suitable bolts:
3x 18012351410
Assembly notes:
Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
suitable for plough body:
U 1503
This item cannot be returned or cancelled as it is classed as a special order.
GRANIT Beak share

GRANIT Beak share

including bolts, right

Bolts with nuts included:
3 x 18012351410
Assembly notes:
Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
GRANIT Beak share

GRANIT Beak share

Left (3 holes)

Suitable bolts:
3x 18012351410
Assembly notes:
Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
suitable for plough body:
EX 3303
GRANIT Beak share

GRANIT Beak share

including bolts, left (3-hole)

Bolts with nuts included:
3 x 18012351410
Assembly notes:
Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
GRANIT Mouldboard tip
Suitable bolts:
2x 18012351410
Assembly notes:
Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
suitable for plough body:
U 903
GRANIT Mouldboard tip

GRANIT Mouldboard tip

including bolts, right

Bolts with nuts included:
2 x 18012351410
Assembly notes:
Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
GRANIT Mouldboard tip
Suitable bolts:
2x 18012351410
Assembly notes:
Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
suitable for plough body:
U 903
GRANIT Mouldboard tip

GRANIT Mouldboard tip

including bolts, left

Bolts with nuts included:
2 x 18012351410
Assembly notes:
Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
GRANIT replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.