Kreiseleggenzinken
- Description:
- HR 101, 253
- Types:
- HR 101, 253
- Thickness (mm):
- 12
- Width (mm):
- 110
- Installation dimensions (mm):
- 100
- Length (mm):
- 270
- Hole spacing (mm):
- 68
- To fit:
- Kuhn
- Hole Ø (mm):
- 16,5
- Version:
- Right
Show more details
- Description:
- HR 101, 253
- Types:
- HR 101, 253
- Thickness (mm):
- 12
- Width (mm):
- 110
- Installation dimensions (mm):
- 100
- Length (mm):
- 270
- Hole spacing (mm):
- 68
- To fit:
- Kuhn
- Hole Ø (mm):
- 16,5
- Version:
- Left
Show more details
- Description:
- HR 101, 253
- Types:
- HR 101, 253
- Thickness (mm):
- 13
- Width (mm):
- 110
- Length (mm):
- 270
- Material:
- Advantages of chromium carbide coatings
Granit parts are coated with a special
wear protection alloy. The carrier material is an
alloy with a high chromium content and
added tungsten carbide particles.
The coating process takes place at extremely high temperatures in a controlled atmosphere.
The almost perfect cohesion between the coating with the body ensures maximum resistance and durability.
The coating is characterised by its compactness and its homogeneous surface.
The average hardness is around 600 HV with a carbide hardness between 2500 and 3000 HV.
The coating process used ensures excellent anchoring of the coating to the body.
Complete or partial detachment of the coating is almost impossible, even as a result of impacts caused by stones in the ground.
The coating not only extends the service life of the tool, but also ensures high dimensional stability as a result of the low wear, which is essential for a consistently good work result. - Version:
- rechts
Show more details
- Description:
- HR 101, 253
- Types:
- HR 101, 253
- Thickness (mm):
- 13
- Width (mm):
- 110
- Length (mm):
- 270
- Material:
- Advantages of chromium carbide coatings
Granit parts are coated with a special
wear protection alloy. The carrier material is an
alloy with a high chromium content and
added tungsten carbide particles.
The coating process takes place at extremely high temperatures in a controlled atmosphere.
The almost perfect cohesion between the coating with the body ensures maximum resistance and durability.
The coating is characterised by its compactness and its homogeneous surface.
The average hardness is around 600 HV with a carbide hardness between 2500 and 3000 HV.
The coating process used ensures excellent anchoring of the coating to the body.
Complete or partial detachment of the coating is almost impossible, even as a result of impacts caused by stones in the ground.
The coating not only extends the service life of the tool, but also ensures high dimensional stability as a result of the low wear, which is essential for a consistently good work result. - Version:
- links
Show more details
- Thickness (mm):
- 12
- Width (mm):
- 110
- Installation dimensions (mm):
- 90
- Length (mm):
- 270
- Hole spacing (mm):
- 68
- Material:
- Advantages of chromium carbide coatings
Granit parts are coated with a special
wear protection alloy. The carrier material is an
alloy with a high chromium content, to which
tungsten carbide particles have been added.
The coating process takes place at extremely high temperatures in a controlled atmosphere.
The almost perfect cohesion between the coating with the body ensures maximum resistance and durability.
The coating is characterised by its compactness and its homogeneous surface.
The average hardness is around 600 HV with a carbide hardness between 2500 and 3000 HV.
The coating process used ensures excellent anchoring of the coating to the body.
Complete or partial detachment of the coating is almost impossible, even as a result of impacts caused by stones in the ground.
The coating not only extends the service life of the tool, but also ensures high dimensional stability as a result of the low wear, which is essential for a consistently good work result. - Hole Ø (mm):
- 16,5
- Version:
- Right
Show more details
This item cannot be returned or cancelled as it is classed as a special order.
- Thickness (mm):
- 12
- Width (mm):
- 110
- Installation dimensions (mm):
- 90
- Length (mm):
- 270
- Hole spacing (mm):
- 68
- Material:
- Advantages of chromium carbide coatings
Granit parts are coated with a special
wear protection alloy. The carrier material is an
alloy with a high chromium content, to which
tungsten carbide particles have been added.
The coating process takes place at extremely high temperatures in a controlled atmosphere.
The almost perfect cohesion between the coating with the body ensures maximum resistance and durability.
The coating is characterised by its compactness and its homogeneous surface.
The average hardness is around 600 HV with a carbide hardness between 2500 and 3000 HV.
The coating process used ensures excellent anchoring of the coating to the body.
Complete or partial detachment of the coating is almost impossible, even as a result of impacts caused by stones in the ground.
The coating not only extends the service life of the tool, but also ensures high dimensional stability as a result of the low wear, which is essential for a consistently good work result. - Hole Ø (mm):
- 16,5
- Version:
- Left
Show more details
This item cannot be returned or cancelled as it is classed as a special order.
- To fit:
- Kuhn (Huard)
- Version:
- Right
This item cannot be returned or cancelled as it is classed as a special order.
- To fit:
- Kuhn (Huard)
- Version:
- Left
This item cannot be returned or cancelled as it is classed as a special order.
- L (mm):
- 55
- Thread:
- M16 x 1.5
- Quality:
- 12.9
- Length (mm):
- 55
- Reference no.:
- John Deere: EB80061675
- Thread length (mm):
- 35
- G (mm):
- 40
Show more details
- No. per blade:
- 1
- Thread:
- M16 x 1.5
- Quality:
- 10.9
- Height H (mm):
- 20
Show more details
- Dimensions (mm):
- Ø 16
- Reference no.:
- John Deere: 24H1139
- Description:
- HRB 102 S
- Types:
- HRB103, HRB122, HRB152, HRB182, HRB202, HRB202S, HRB252D, HRB302D, HRB303D, HRB353D, HRB353DN, HRB403D, HRB403DR, HRB453DR, HRB503DR
- Thickness (mm):
- 14
- Width (mm):
- 110
- Installation dimensions (mm):
- 141
- Length (mm):
- 290
- Hole Ø (mm):
- 20
- Version:
- Right
Show more details
GRANIT replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.