Howard / Kongskilde
- Thickness (mm):
- 6
- Working width (mm):
- 140
- Hole Ø (mm):
- 11.5
- Installation dimensions (mm):
- 76
- Length (mm):
- 170
- Hole spacing (mm):
- 57
Show more details
- Thickness (mm):
- 6
- Working width (mm):
- 140
- Hole Ø (mm):
- 11.5
- Installation dimensions (mm):
- 76
- Length (mm):
- 170
- Hole spacing (mm):
- 57
Show more details
- Ø D (mm):
- 16
- No. per share:
- 2
- No. per blade:
- 1
- Thread:
- M16
- Quality:
- 12.9
- Length (mm):
- 45
- G (mm):
- 22
Show more details
- Thickness (mm):
- 6
- Working width (mm):
- 140
- Hole Ø (mm):
- 11,5
- Installation dimensions (mm):
- 75
- Length (mm):
- 170
- Hole spacing (mm):
- 57
- Material:
- Description of the advantages of chrome carbide coatings
For the coating of our granite articles a special
wear protection alloy is used. The substrate used is an alloy,
composed of a high percentage of chromium, to which is added
tungsten carbide particles.
The coating process is carried out under extremely high temperatures in a controlled atmosphere.
The almost perfect cohesion of the coating with the base body ensures maximum resistance and toughness.
The applied coating is characterized by its compactness and its particularly homogeneous surface.
The average hardness is about 600 HV with a carbide hardness between 2500 and 3000 HV.
The coating process used ensures excellent anchoring of the coating to the base body.
Complete or partial detachment of the coating is virtually impossible, even as a result of impacts caused by stones in the ground.
The applied coating not only extends the service life of the tool, but also ensures high dimensional stability due to low wear, which is essential for consistently good work results.
Show more details
This item cannot be returned or cancelled as it is classed as a special order.
- Thickness (mm):
- 6
- Working width (mm):
- 140
- Hole Ø (mm):
- 11,5
- Installation dimensions (mm):
- 75
- Length (mm):
- 170
- Hole spacing (mm):
- 57
- Material:
- Description of the advantages of chrome carbide coatings
For the coating of our granite articles a special
wear protection alloy is used. The substrate used is an alloy,
composed of a high percentage of chromium, to which is added
tungsten carbide particles.
The coating process is carried out under extremely high temperatures in a controlled atmosphere.
The almost perfect cohesion of the coating with the base body ensures maximum resistance and toughness.
The applied coating is characterized by its compactness and its particularly homogeneous surface.
The average hardness is about 600 HV with a carbide hardness between 2500 and 3000 HV.
The coating process used ensures excellent anchoring of the coating to the base body.
Complete or partial detachment of the coating is virtually impossible, even as a result of impacts caused by stones in the ground.
The applied coating not only extends the service life of the tool, but also ensures high dimensional stability due to low wear, which is essential for consistently good work results.
Show more details
This item cannot be returned or cancelled as it is classed as a special order.
- Thickness (mm):
- 8
- Working width (mm):
- 105
- Hole Ø (mm):
- 11,5
- Installation dimensions (mm):
- 45
- Length (mm):
- 290
- Hole spacing (mm):
- 114
Show more details
- Thickness (mm):
- 8
- Working width (mm):
- 105
- Hole Ø (mm):
- 11,5
- Installation dimensions (mm):
- 45
- Length (mm):
- 290
- Hole spacing (mm):
- 114
Show more details
GRANIT Bolt with nut
Part no.:18030-71635
- Dimensions (mm):
- 7/16" UNF x 35
- L (mm):
- 35
- No. per blade:
- 2
- Thread:
- 7/16" UNF
- Quality:
- 12.9
- G (mm):
- 22
Show more details
- Thickness (mm):
- 6
- Working width (mm):
- 140
- Hole Ø (mm):
- 11,5
- Installation dimensions (mm):
- 75
- Length (mm):
- 175
- Hole spacing (mm):
- 57
Show more details
- Thickness (mm):
- 6
- Working width (mm):
- 140
- Hole Ø (mm):
- 11,5
- Installation dimensions (mm):
- 75
- Length (mm):
- 175
- Hole spacing (mm):
- 57
Show more details
- Thickness (mm):
- 6
- Working width (mm):
- 140
- Hole Ø (mm):
- 13
- Installation dimensions (mm):
- 90
- Length (mm):
- 170
- Hole spacing (mm):
- 57
Show more details
- Thickness (mm):
- 6
- Working width (mm):
- 140
- Hole Ø (mm):
- 13
- Installation dimensions (mm):
- 90
- Length (mm):
- 170
- Hole spacing (mm):
- 57
Show more details
GRANIT replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.