HAZET safety insert system (SIS)

Hazet Soft foam insert

Hazet Soft foam insert

Leereinlage ohne Werkzeuge

Part no.:11179039
Reference no.:
163D-9L
This item cannot be returned or cancelled as it is classed as a special order.
Hazet Soft foam insert

Hazet Soft foam insert

Leereinlage ohne Werkzeuge

Part no.:11198684
Reference no.:
163D-12L
This item cannot be returned or cancelled as it is classed as a special order.
Hazet Plastic protective cover
Description:
- Universally applicable on almost all passenger cars. - Plastic protective support (2 pieces). - Anti-rotation device for lower clamping plates integrated in the base body reduces the outer diameter to only 32 mm due to compact design. - Pendulum hexagonal head for even force distribution with integrated anti-rotation protection for upper clamping plates. - One-sided counter-holding of the spindle possible due to hexagonal head mounted on top, e.g. with combination wrench HAZET 600 N-13. - Removal and installation of springs with small coil spacing, e.g. on the MINI Cooper S (third generation) ∙ VW Passat (B8). - Extension of clamping travel to 120 mm as well as increase of maximum load for increasing vehicle weights (electric and hybrid vehicles) for safe working up to 31,000 N → Tested with at least fourfold safety against breakage (GS mark testedfte safety). - 17° swivel angle of the clamping plates now ensures the disassembly of C-shaped (bent) springs, e.g. on the AUDI A4 (B9) ∙ VW Golf 7. - Internal and external guidance of the clamping plates prevents the spring from slipping out. - All clamping plates including reusable, replaceable plastic protective pads. - L-Boxx 102 with soft foam insert and operating instructions. - Developed and produced "Made in Germany". - Universally applicable and tested on vehicles from the following manufacturers: - AUDI ∙ BMW ∙ citroËN ∙ FIAT ∙ FORD ∙ hyundai ∙ KIA ∙ mazda ∙ mercedes BENZ ∙ MINI ∙ OPEL ∙ peugeot ∙ renault ∙ SEAT ∙ ŠKODA ∙ TOYOTA ∙ volkswagen. Highlights: - One-man operation. - Eliminates time-consuming work associated with most spring disassembly:- Eliminates need to remove axle parts. - Wheel alignment no longer necessary. - Disassembly and assembly in just a few minutes per side. - Conclusion: Compact HAZET design allows spring replacement on numerous vehicles with significant time savings!. - Made In Germany.
Weight (g):
41
This item cannot be returned or cancelled as it is classed as a special order.
Hazet Soft foam insert

Hazet Soft foam insert

Leereinlage ohne Werkzeuge

Part no.:11211898
Reference no.:
163D-6L
This item cannot be returned or cancelled as it is classed as a special order.
Hazet Soft foam insert

Hazet Soft foam insert

Leereinlage ohne Werkzeuge

Part no.:11213270
Reference no.:
163D-2L
This item cannot be returned or cancelled as it is classed as a special order.
Hazet Soft foam insert

Hazet Soft foam insert

Leereinlage ohne Werkzeuge

Part no.:11214483
Reference no.:
163D-1L
This item cannot be returned or cancelled as it is classed as a special order.
Hazet Soft foam insert

Hazet Soft foam insert

Leereinlage ohne Werkzeuge

Part no.:11215072
Reference no.:
163D-8L
This item cannot be returned or cancelled as it is classed as a special order.
This item cannot be returned or cancelled as it is classed as a special order.
Hazet Soft foam insert

Hazet Soft foam insert

Leereinlage ohne Werkzeuge

Part no.:11217467
Reference no.:
163D-11L
This item cannot be returned or cancelled as it is classed as a special order.
Hazet Soft foam insert
Description:
2-component soft foam insert empty - for163-571. - Dimensions / length: 392 mm x 172 mm. - Arrangement system size: 1/3+ (172 x 392 mm).
Weight (g):
84
Length:
392 mm
Width:
172 mm
Show more details
This item cannot be returned or cancelled as it is classed as a special order.
Hazet Soft foam insert
Description:
2-component soft foam insert empty - for163-580. - Dimensions / length: 342 mm x 172 mm. - Arrangement system size: 1/3 (342 x 172 mm) / for HAZET 165-L.
Length:
342 mm
Width:
172 mm
This item cannot be returned or cancelled as it is classed as a special order.
Hazet Soft foam insert
Description:
2-component soft foam insert empty - for 953 HP. - Dimensions / length: 342 mm x 172 mm. - Arrangement system size: 1/3 (342 x 172 mm) / for HAZET 165-L.
Weight (g):
47
Length:
342 mm
Width:
172 mm
Show more details
This item cannot be returned or cancelled as it is classed as a special order.
Original spare part numbers are for comparison purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.