Bosch system SB1
GRANIT Control unit
Optionally switchable between sa and da, without float position, with lever
Part no.:85219081
- Technical data:
- Max. operating pressure: 220 bar
Nominal flow rate: max. 40l/min
Tightening torque: 30 Nm
Connections: M18 x 1.5
dimensions: 170 x 40 x 75 mm - Description:
- This auxiliary control unit is a 5/3-way valve, which is manually operated to control cylinders and hydraulic motors. This auxiliary control unit is a three-position device that can be used for double- and single-acting lifting cylinders. It has gate-sealed consumer connections A and B. This means extremely low internal leakage rates under high loads. The auxiliary control unit can be switched from double- to single-acting This is also possible during operation.
- Technical data:
- max. operating pressure: 210 bar
nominal flow: max. 40l/min.
tightening torque: 30 Nm
connections: M18 x 1.5
dimensions: 124 x 40 x 75 mm - Description:
- This auxiliary control unit is a 5/3-way valve that is manually operated to control cylinders and hydraulic motors. The auxiliary control unit is a three-position unit that can be used for double-acting lifting cylinders. It has valve-sealed consumer connections A and B. This means that extremely low internal leakage is allowed at high loads.
GRANIT Control unit
optionally switchable between sa and da, with float position with detent and lever
Part no.:85219082
- Technical data:
- Max. operating pressure: 210 bar
Nominal flow rate: max. 40l/min
Tightening torque: 30 Nm
Connections: M18 x 1.5
dimensions: 180 x 40 x 75 mm - Description:
- This auxiliary control unit is a four-position device that can be used for double- and single-acting lifting cylinders. It has gate-sealed consumer connections A and B. This means extremely low internal leakage rates under high loads. When switching via the lowering position, the locked float position is engaged. This cannot be unlocked hydraulically (consumer connections A and B are connected to the return line). The float position can be used on double- and single-acting lifting cylinders as locked lowering position. The auxiliary control unit can be switched from double- to single-acting and vice versa. This is also possible during operation. Before installation, be sure to check the length of the valve. Care must be taken to ensure that this valve does not rest on the steering knuckle.
- Technical data:
- max. operating pressure: 210 bar nominal flow: max. 40l/min. locking torque: 30 Nm connections: M 18 x 1.5 dimensions: 124 x 40 x 75 mm
- Description:
- This auxiliary control unit is a 5/3-way valve which is used manually to control cylinders and hydraulic motors. The auxiliary control unit is a three-position unit that can be used for single-acting lifting cylinders. It has valve-sealed consumer connections A and B. This means that extremely low internal leakage is allowed at high loads. The lowering position can be used as an unlatched float position.
- Technical data:
- Max. operating pressure: 220 bar
Nominal flow rate: max. 30l/min
Tightening torque: 30 Nm
Connections: M18 x 1.5
dimensions: 110 x 70 x 40 mm - Description:
- This auxiliary control unit is a 5/4-way valve which is manually operated to control cylinders and hydraulic motors. This auxiliary control unit is a three-position device that can be used for single-acting lifting cylinders. It has gate-sealed consumer connections A and B. This means extremely low internal leakage rates under high loads. The lowering position can be used as a locked float position.
GRANIT Control lever
Part no.:85299002
- Technical data:
- Length: 200 mm
GRANIT Intake plate
This intake plate is equipped with a pressure relief valve for securing the hydraulic system, and a connection for supply and return flow. The intake plate has a pilot valve for controlling the oil quantity
Part no.:85219024
- Technical data:
- max. operating pressure: 210 bar
nominal flow: max. 40l/min.
tightening torque: 30 Nm
connections: M18 x 1.5
dimensions: 90 x 40 x 131 mm
GRANIT End plate
This end plate is necessary for connecting a directional control valve combination
Part no.:85219015
- Technical data:
- max. operating pressure: 210 bar nominal flow: max. 40l/min. locking torque: 30 Nm dimensions: 80 x 10 x 70 mm
GRANIT Bolt set
Part no.:85295001
- Technical data:
- consisting of:
2x M8 x 110,
1x M8 x 60,
2x M8
for 1st control unit
GRANIT Bolt set
Part no.:85295028
- Technical data:
- consisting of:
2x M8 x 150,
1x M8 x 100,
2x M8
for 2nd control unit
GRANIT Bolt set
Part no.:85295029
- Technical data:
- consisting of:
2x M8 x 190,
1x M8 x 140,
2x M8
for 3rd control unit
GRANIT Bolt set
Part no.:85295030
- Technical data:
- consisting of:
2x M8 x 230,
1x M8 x 180,
2x M8
for 4th control unit
GRANIT replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.