Fiat

GRANIT Control unit

GRANIT Control unit

Can be switched between sa and da, with float position with detent and limit stop adjustable from 150 - 210 bar

Part no.:85219130
Technical data:
Max. operating pressure: 220 bar
Nominal flow rate: max. 70 l/min
Tightening torque: 30 Nm
Connections: M18 x 1.5
Dimensions: 210 x 95 x 40 mm
Screw connection: 3x M10
Hole pattern identical to the Parker/Kontak system
Description:
This control unit is a 5/4-way valve that is manually operated to control single- and double-acting cylinders and hydraulic motors. This control valve has been specially developed for Fiatagri tractors with Kontak hydraulics. Thanks to the high output, up to four control valves can be flanged directly. As the hole pattern is identical to Kontak, this valve can also be fitted with original Kontak control valves. The aforementioned control valve is a four-position device. It can be switched from double- to single-acting and vice versa. It is a gate-sealed control valve with neutral fine control, meaning that very low fit leakage is permitted, even at the highest pressure. The device has a latched safety limit stop in the lift position. When switching via the lower position, the latched float position is reached. This can be returned to the neutral position by hand at any time.
GRANIT Lever assembly
Technical data:
can be used in 90, 94 and Winner
GRANIT Lever

GRANIT Lever

with bolt and lock

Part no.:85299006
GRANIT Bolt set
Technical data:
M10 x 120
Description:
for 1. control unit
GRANIT Bolt set
Technical data:
M10 x 160
Description:
for 2nd control unit
GRANIT Bolt set
Technical data:
M10 x 200
Description:
for 3rd control unit
GRANIT Gasket set

GRANIT Gasket set

for control unit 85219130 flange surface with O-ring and support ring

Part no.:85286126
GRANIT replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.