Ford

GRANIT Control unit

GRANIT Control unit

Can be switched between sa and da, with float position with detent and limit stop adjustable from 150 - 210 bar

Part no.:85219130
Technical data:
Max. operating pressure: 220 bar
Nominal flow rate: max. 70 l/min
Tightening torque: 30 Nm
Connections: M18 x 1.5
Dimensions: 210 x 95 x 40 mm
Screw connection: 3x M10
Hole pattern identical to the Parker/Kontak system
Description:
This control unit is a 5/4-way valve that is manually operated to control single- and double-acting cylinders and hydraulic motors. This control valve has been specially developed for Fiatagri tractors with Kontak hydraulics. Thanks to the high output, up to four control valves can be flanged directly. As the hole pattern is identical to Kontak, this valve can also be fitted with original Kontak control valves. The aforementioned control valve is a four-position device. It can be switched from double- to single-acting and vice versa. It is a gate-sealed control valve with neutral fine control, meaning that very low fit leakage is permitted, even at the highest pressure. The device has a latched safety limit stop in the lift position. When switching via the lower position, the latched float position is reached. This can be returned to the neutral position by hand at any time.
GRANIT Control unit

GRANIT Control unit

Optionally switchable between sa and da
This control valve is a 5/3-way valve with sandwich construction, connected in parallel. It can be switched between double- and single-acting. It is equipped with spring return and adjustable locking as standard. It has a connection ZZ for the additional power multiplication cylinder. Gasket set, bolt kit and lever included in basic equipment. Two each screws 7/16"-14 x 3 1/2" and 7/16"-14 x 5" are included in delivery.

Part no.:85219032
Technical data:
max. operating pressure: 210 bar
nominal flow: max. 50l/min.
tightening torque: 30 Nm
dimensions: 200 x 185 x 65 mm
This item cannot be returned or cancelled as it is classed as a special order.
GRANIT Lever assembly
Technical data:
can be used in 90, 94 and Winner
GRANIT Lever

GRANIT Lever

with bolt and lock

Part no.:85299006
GRANIT Bolt set
Technical data:
M10 x 120
GRANIT Bolt set
Technical data:
M10 x 160
GRANIT Bolt set
Technical data:
M10 x 200
GRANIT Standard sandwich plate

GRANIT Standard sandwich plate

with ZZ connection

Part no.:85219028
Technical data:
max. operating pressure: 210 bar
nominal flow: max. 70l/min.
tightening torque: 30 Nm
dimensions: 160 x 110 x 32 mm
Description:
This sandwich plate is mounted between the transmission and the transmission cover or control valve. The plate has a hydraulic connection on the side for the rear hydraulics auxiliary cylinder.
GRANIT Lifting plate

GRANIT Lifting plate

galvanised and blue passivated with bolts

Part no.:85219029
Technical data:
max. operating pressure: 210 bar
nominal flow: max. 60l/min.
tightening torque: 30 Nm
dimensions: 160 x 130 x 10 mm
Description:
This plate is only intended to lift the control valve on the Ford 5000 tractor series. This prevents the end cap of the control valve from striking the power lift block.
GRANIT replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.