John Deere
GRANIT Base valve
for retrofitting with accessories, not compatible with OEM auxiliary control units
Part no.:85212001
- Description:
- These control units are suitable for tractors with closed hydraulic systems and without safety cab. 4/3-way valves, connected in parallel, are mounted in block construction. Single- and double-acting, the neutral position can be locked. Changeover from spring position to detent is possible.
GRANIT Repair set
Part no.:85212032
GRANIT Operating cable
Part no.:85212000
GRANIT Additional control unit
for retrofitting for base valve 85212001, not compatible with OEM auxiliary control units or base valves
Part no.:85212002
- Technical data:
- Max. operating pressure: 220 bar
Nominal flow rate: max. 50 l/min
Tightening torque: 30 Nm
Connections: M18 x 1.5
dimensions: 220 x 45 x 65 mm - Description:
- This auxiliary control unit is a 5/3-way valve that is manually operated to control cylinders and hydraulic motors. This auxiliary control unit is a three-position device that can be used for double- and single-acting lifting cylinders. It has gate-sealed consumer connections A and B. This means extremely low internal leakage rates under high loads. The auxiliary control unit can be switched from double- to single-acting and vice versa. This is also possible during operation. The control valve is supplied with a single lever. A stowage valve is provided.
GRANIT End control unit
Part no.:85212034
GRANIT Additional control unit
for retrofitting in 3rd position, not compatible with OEM auxiliary control units or base valves
Part no.:85212005
- Technical data:
- Tightening torque: 25 Nm
- Description:
- Max. operating pressure: 220 bar
Nominal flow rate: max. 50 l/min
Tightening torque: 25 Nm
Connections: M18 x 1.5
dimensions: 220 x 45 x 65 mm
GRANIT replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.