Bosch-System SB7 3-hole

GRANIT Control unit

GRANIT Control unit

Can be switched between single- and double-acting, with float position with detent and limit stop (with lever), consumer connections can be used at top and bottom

Part no.:85219002
Technical data:
Max. operating pressure: 250 bar
Nominal flow rate: max. 60 l/min
Tightening torque: 30 Nm
Connections: M18 x 1.5
Dimensions: 180 x 50 x 130 mm
Description:
This auxiliary control unit is a four-position device that can be used for double- and single-acting lifting cylinders. It has gate-sealed cylinder connections A and B. This means extremely low leakage rates is permissible at high loads. The consumer connections A and B can be found on the top and bottom of the housing. The device has a detent position in the lifting position that is equipped with an automatic hydraulic limit switch, and that releases at 180 bar. When switching via the lowering position, the locked float position is engaged. This cannot be unlocked hydraulically (consumer connections A and B are connected to the return line). The float position can be used on double- and single-acting lifting cylinders as locked lowering position. The auxiliary control unit can be switched from double- to single-acting and vice versa. This is also possible during operation. The control lever is included in delivery.
GRANIT Control unit

GRANIT Control unit

This control valve is used in the tractor to control and regulate the power lift unit. It can also be used to lift and lower implements continuously, to maintain a predetermined position, or to achieve optimum utilisation of the tractor power. Disturbances are corrected automatically, which makes driving easier. The control valve can be used for position control, traction control or mixed control depending on the application.

Part no.:85219079
Technical data:
Max. operating pressure: 220 bar
Nominal flow rate: max. 70 l/min
Tightening torque: 30 Nm
Connections: M18 x 1.5
Dimensions: 210 x 50 x 130 mm
GRANIT Bolt set
Technical data:
3x M8 x 130 for 2. Control unit
Description:
for 1. control unit
GRANIT Bolt set
Technical data:
3x M8 x 180 for 3. Control unit
Description:
for 2nd control unit
GRANIT Bolt set

GRANIT Bolt set

for 3rd control unit

Part no.:85295004
Technical data:
3x M8 x 230 for 3. Control unit
GRANIT Bolt set

GRANIT Bolt set

for 4th control unit

Part no.:85295005
Technical data:
3x M8 x 280 for 4. Control unit
GRANIT Gasket set

GRANIT Gasket set

for SB7 auxiliary control unit flange surface
with O-rings external

Part no.:85286006
GRANIT Gasket set

GRANIT Gasket set

for SB7 auxiliary control unit flange surface
with O-ring and support ring external

Part no.:85286015
GRANIT Ball pin

GRANIT Ball pin

for control unit 850A14703

Part no.:85292026
GRANIT replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.