BP-324 PS
- Suitable bolts:
- 2x 1801237R
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- MP293
- Picture no.:
- 6
- suitable for plough body:
- BP-GMU v, BP-GMU, UBP-GMU, SBP-GMU v, SBP-GMU, USBP-GMU, BP-GMW, SBP-GMW v, SBP-GMW, USBP-GMW
Show more details
- Suitable bolts:
- 2x 1801237R
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- MP293L
- Picture no.:
- 6
- suitable for plough body:
- BP-GMU v, BP-GMU, UBP-GMU, SBP-GMU v, SBP-GMU, USBP-GMU, BP-GMW, SBP-GMW v, SBP-GMW, USBP-GMW
Show more details
- Suitable bolts:
- 2x 1801237R
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 6
- suitable for plough body:
- BP-GMU v, BP-GMU, UBP-GMU, SBP-GMU v, SBP-GMU, USBP-GMU, BP-GMW, SBP-GMW v, SBP-GMW, USBP-GMW
Show more details
This item cannot be returned or cancelled as it is classed as a special order.
- Bolts with nuts included:
- 2 x 1801237R
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Picture no.:
- 6
- suitable for plough body:
- BP-GMU v, BP-GMU, UBP-GMU, SBP-GMU v, SBP-GMU, USBP-GMU, BP-GMW, SBP-GMW v, SBP-GMW, USBP-GMW
Show more details
- Suitable bolts:
- 2x 1801237R
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 6
- suitable for plough body:
- BP-GMU v, BP-GMU, UBP-GMU, SBP-GMU v, SBP-GMU, USBP-GMU, BP-GMW, SBP-GMW v, SBP-GMW, USBP-GMW
Show more details
This item cannot be returned or cancelled as it is classed as a special order.
- Bolts with nuts included:
- 2 x 1801237R
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Picture no.:
- 6
- suitable for plough body:
- BP-GMU v, BP-GMU, UBP-GMU, SBP-GMU v, SBP-GMU, USBP-GMU, BP-GMW, SBP-GMW v, SBP-GMW, USBP-GMW
Show more details
- Suitable bolts:
- 3x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- SSP293OSE
- Picture no.:
- 8
- suitable for plough body:
- BP-293 N, BP-293 O v, BP-293 O, UBP-293 O, SBP-293 O v, SBP-293 O, USBP-293 O, BP-293 R v, BP-293 R, UBP-293 R, SBP-293 R v, SBP-293 R, USBP-293 R, BP-321 P v, BP-321 P, UBP-321 P, SBP-321 P v, SBP-321 P, USBP-321 P, BP-321 PS, BP-324 PS, BP-343 O v, BP-343 O, UBP-343 O, SBP-343 O v, SBP-343 O, USBP-343 O, BP-343 R v, BP-343 R, UBP-343 R, SBP-343 R v, SBP-343 R, USBP-343 R, BP-343 RS, SCP-343 RS, BP-350 O, BP-353 RS, BP-361 P v, BP-361 P, UBP-361 P, SBP-361 P v, SBP-361 P, USBP-361 P, BP-380 PS
Show more details
- Bolts with nuts included:
- 3 x 1801235810
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Designation:
- SSP293OSE
- Picture no.:
- 8
- suitable for plough body:
- BP-293 N, BP-293 O v, BP-293 O, UBP-293 O, SBP-293 O v, SBP-293 O, USBP-293 O, BP-293 R v, BP-293 R, UBP-293 R, SBP-293 R v, SBP-293 R, USBP-293 R, BP-321 P v, BP-321 P, UBP-321 P, SBP-321 P v, SBP-321 P, USBP-321 P, BP-321 PS, BP-324 PS, BP-343 O v, BP-343 O, UBP-343 O, SBP-343 O v, SBP-343 O, USBP-343 O, BP-343 R v, BP-343 R, UBP-343 R, SBP-343 R v, SBP-343 R, USBP-343 R, BP-343 RS, SCP-343 RS, BP-350 O, BP-353 RS, BP-361 P v, BP-361 P, UBP-361 P, SBP-361 P v, SBP-361 P, USBP-361 P, BP-380 PS
Show more details
- Suitable bolts:
- 3x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- SSP293OSEL
- Picture no.:
- 8
- suitable for plough body:
- BP-293 N, BP-293 O v, BP-293 O, UBP-293 O, SBP-293 O v, SBP-293 O, USBP-293 O, BP-293 R v, BP-293 R, UBP-293 R, SBP-293 R v, SBP-293 R, USBP-293 R, BP-321 P v, BP-321 P, UBP-321 P, SBP-321 P v, SBP-321 P, USBP-321 P, BP-321 PS, BP-324 PS, BP-343 O v, BP-343 O, UBP-343 O, SBP-343 O v, SBP-343 O, USBP-343 O, BP-343 R v, BP-343 R, UBP-343 R, SBP-343 R v, SBP-343 R, USBP-343 R, BP-343 RS, SCP-343 RS, BP-350 O, BP-353 RS, BP-361 P v, BP-361 P, UBP-361 P, SBP-361 P v, SBP-361 P, USBP-361 P, BP-380 PS
Show more details
- Bolts with nuts included:
- 3 x 1801235810
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Designation:
- SSP293OSEL
- Picture no.:
- 8
- suitable for plough body:
- BP-293 N, BP-293 O v, BP-293 O, UBP-293 O, SBP-293 O v, SBP-293 O, USBP-293 O, BP-293 R v, BP-293 R, UBP-293 R, SBP-293 R v, SBP-293 R, USBP-293 R, BP-321 P v, BP-321 P, UBP-321 P, SBP-321 P v, SBP-321 P, USBP-321 P, BP-321 PS, BP-324 PS, BP-343 O v, BP-343 O, UBP-343 O, SBP-343 O v, SBP-343 O, USBP-343 O, BP-343 R v, BP-343 R, UBP-343 R, SBP-343 R v, SBP-343 R, USBP-343 R, BP-343 RS, SCP-343 RS, BP-350 O, BP-353 RS, BP-361 P v, BP-361 P, UBP-361 P, SBP-361 P v, SBP-361 P, USBP-361 P, BP-380 PS
Show more details
- Suitable bolts:
- 3x 1801230810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- VRP342R
- Picture no.:
- 5
- suitable for plough body:
- BP-342 R v, UBP-342 R, BP-343 R v, BP-343 R, UBP-343 R, SBP-343 R v, SBP-343 R, USBP-343 R, BP-344 R
Show more details
- Bolts with nuts included:
- 3 x 1801230810
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Designation:
- VRP342R
- Picture no.:
- 5
- suitable for plough body:
- BP-342 R v, UBP-342 R, BP-343 R v, BP-343 R, UBP-343 R, SBP-343 R v, SBP-343 R, USBP-343 R, BP-344 R
Show more details
- Suitable bolts:
- 3x 1801230810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- VRP342RL
- Picture no.:
- 5
- suitable for plough body:
- BP-342 R v, UBP-342 R, BP-343 R v, BP-343 R, UBP-343 R, SBP-343 R v, SBP-343 R, USBP-343 R, BP-344 R
Show more details
- Bolts with nuts included:
- 3 x 1801230810
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Designation:
- VRP342RL
- Picture no.:
- 5
- suitable for plough body:
- BP-342 R v, UBP-342 R, BP-343 R v, BP-343 R, UBP-343 R, SBP-343 R v, SBP-343 R, USBP-343 R, BP-344 R
Show more details
- Suitable bolts:
- 4x 1801235RA
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- SRP328P1
- Picture no.:
- 4
- suitable for plough body:
- Streifenkörper BP-321 PS, BP-322 PS, BP-324 PS, BP-323 PS
Show more details
- Bolts with nuts included:
- 4 x 1801235RA
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Designation:
- SRP328P1
- Picture no.:
- 4
- suitable for plough body:
- Streifenkörper BP-321 PS, BP-322 PS, BP-324 PS, BP-323 PS
Show more details
- Suitable bolts:
- 4x 1801235RA
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- SRP328P1L
- Picture no.:
- 4
- suitable for plough body:
- Streifenkörper BP-321 PS, BP-322 PS, BP-324 PS, BP-323 PS
Show more details
- Bolts with nuts included:
- 4 x 1801235RA
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Designation:
- SRP328P1L
- Picture no.:
- 4
- suitable for plough body:
- Streifenkörper BP-321 PS, BP-322 PS, BP-324 PS, BP-323 PS
Show more details
- Suitable bolts:
- 2x 1801235RA
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- SRP328P2
- Picture no.:
- 3
- suitable for plough body:
- Streifenkörper BP-321 PS, BP-322 PS, BP-324 PS, BP-323 PS
Show more details
- Bolts with nuts included:
- 2 x 1801235RA
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Designation:
- SRP328P2
- Picture no.:
- 3
- suitable for plough body:
- Streifenkörper BP-321 PS, BP-322 PS, BP-324 PS, BP-323 PS
Show more details
- Suitable bolts:
- 2x 1801235RA
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- SRP328P2L
- Picture no.:
- 3
- suitable for plough body:
- Streifenkörper BP-321 PS, BP-322 PS, BP-324 PS, BP-323 PS
Show more details
- Bolts with nuts included:
- 2 x 1801235RA
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Designation:
- SRP328P2L
- Picture no.:
- 3
- suitable for plough body:
- Streifenkörper BP-321 PS, BP-322 PS, BP-324 PS, BP-323 PS
Show more details
- Suitable bolts:
- 2x 1801235RA
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- SRP328P3
- Picture no.:
- 2
- suitable for plough body:
- Streifenkörper BP-321 PS, BP-322 PS, BP-324 PS, BP-323 PS
Show more details
- Bolts with nuts included:
- 2 x 1801235HU10
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Designation:
- SRP328P3
- Picture no.:
- 2
- suitable for plough body:
- Streifenkörper BP-321 PS, BP-322 PS, BP-324 PS, BP-323 PS
Show more details
- Suitable bolts:
- 2x 1801235RA
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- SRP328P3L
- Picture no.:
- 2
- suitable for plough body:
- Streifenkörper BP-321 PS, BP-322 PS, BP-324 PS, BP-323 PS
Show more details
- Bolts with nuts included:
- 2 x 1801235HU10
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Designation:
- SRP328P3L
- Picture no.:
- 2
- suitable for plough body:
- Streifenkörper BP-321 PS, BP-322 PS, BP-324 PS, BP-323 PS
Show more details
- Suitable bolts:
- 2x 1801235RA
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- SRP328P4
- Picture no.:
- 1
- suitable for plough body:
- Streifenkörper BP-321 PS, BP-322 PS, BP-324 PS
Show more details
- Bolts with nuts included:
- 2 x 1801235RA
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Designation:
- SRP328P4
- Picture no.:
- 1
- suitable for plough body:
- Streifenkörper BP-321 PS, BP-322 PS, BP-324 PS
Show more details
- Suitable bolts:
- 2x 1801235RA
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- SRP328P4L
- Picture no.:
- 1
- suitable for plough body:
- Streifenkörper BP-321 PS, BP-322 PS, BP-324 PS
Show more details
- Bolts with nuts included:
- 2 x 1801235RA
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Designation:
- SRP328P4L
- Picture no.:
- 1
- suitable for plough body:
- Streifenkörper BP-321 PS, BP-322 PS, BP-324 PS
Show more details
- Suitable bolts:
- 1 x 1801240810 + 1 x 1801290810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- VP292O
- Picture no.:
- 10
- suitable for plough body:
- BP-292 O v, BP-292 R v, BP-293 N, BP-293 O v, BP-293 O, BP-293 R v, BP-293 R, BP-294 N, BP-294 O, BP-294 R, BP-320 P v, BP-321 P v, BP-321 P, BP-321 PS, BP-322 P, BP-322 PS, BP-323 PS, BP-324 PS, BP-342 O v, BP-342 R v, BP-343 O v, BP-343 O, BP-343 R v, BP-343 R, BP-343 RD, SCP-343 RD, SCP-343 RS, BP-343 RS, BP-344 O, BP-344 R, BP-344 RS, BP-350 O, BP-351 O, BP-353 RS, BP-354 RS, BP-355 RS, BP-360 P v, BP-361 P v, BP-361 P, BP-362 P, BP-380 PS
Show more details
- Bolts with nuts included:
- 1 x 1801240810 + 1 x 1801290810
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Designation:
- VP292O
- Picture no.:
- 10
- suitable for plough body:
- BP-292 O v, BP-292 R v, BP-293 N, BP-293 O v, BP-293 O, BP-293 R v, BP-293 R, BP-294 N, BP-294 O, BP-294 R, BP-320 P v, BP-321 P v, BP-321 P, BP-321 PS, BP-322 P, BP-322 PS, BP-323 PS, BP-324 PS, BP-342 O v, BP-342 R v, BP-343 O v, BP-343 O, BP-343 R v, BP-343 R, BP-343 RD, SCP-343 RD, SCP-343 RS, BP-343 RS, BP-344 O, BP-344 R, BP-344 RS, BP-350 O, BP-351 O, BP-353 RS, BP-354 RS, BP-355 RS, BP-360 P v, BP-361 P v, BP-361 P, BP-362 P, BP-380 PS
Show more details
- Suitable bolts:
- 1 x 1801240810 + 1 x 1801290810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- WP292O
- Picture no.:
- 11
- suitable for plough body:
- BP-292 O v, BP-292 R v, BP-293 N, BP-293 O v, BP-293 O, BP-293 R v, BP-293 R, BP-294 N, BP-294 O, BP-294 R, BP-320 P v, BP-321 P v, BP-321 P, BP-321 PS, BP-322 P, BP-322 PS, BP-323 PS, BP-324 PS, BP-342 O v, BP-342 R v, BP-343 O v, BP-343 O, BP-343 R v, BP-343 R, BP-343 RD, SCP-343 RD, SCP-343 RS, BP-343 RS, BP-344 O, BP-344 R, BP-344 RS, BP-350 O, BP-351 O, BP-353 RS, BP-354 RS, BP-355 RS, BP-360 P v, BP-361 P v, BP-361 P, BP-362 P, BP-380 PS
Show more details
- Bolts with nuts included:
- 1 x 1801240810 + 1 x 1801290810
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Designation:
- WP292O
- Picture no.:
- 11
- suitable for plough body:
- BP-292 O v, BP-292 R v, BP-293 N, BP-293 O v, BP-293 O, BP-293 R v, BP-293 R, BP-294 N, BP-294 O, BP-294 R, BP-320 P v, BP-321 P v, BP-321 P, BP-321 PS, BP-322 P, BP-322 PS, BP-323 PS, BP-324 PS, BP-342 O v, BP-342 R v, BP-343 O v, BP-343 O, BP-343 R v, BP-343 R, BP-343 RD, SCP-343 RD, SCP-343 RS, BP-343 RS, BP-344 O, BP-344 R, BP-344 RS, BP-350 O, BP-351 O, BP-353 RS, BP-354 RS, BP-355 RS, BP-360 P v, BP-361 P v, BP-361 P, BP-362 P, BP-380 PS
Show more details
- Suitable bolts:
- 2x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- XP4
- Picture no.:
- 12
- suitable for plough body:
- BP-233 OS, BP-234 OS, BP-320 W, BP-321 P, BP-321 PS, BP-321 W, BP-322 P, BP-322 PS, BP-323 PS, BP-325 W, BP-330 WS, BP-331 WS, BP-350 O, BP-350 W, BP-350 WS, BP-351 O, BP-351 W, BP-351 WS
Show more details
- Bolts with nuts included:
- 2 x 1801235810
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Designation:
- XP4
- Picture no.:
- 12
- suitable for plough body:
- BP-233 OS, BP-234 OS, BP-320 W, BP-321 P, BP-321 PS, BP-321 W, BP-322 P, BP-322 PS, BP-323 PS, BP-325 W, BP-330 WS, BP-331 WS, BP-350 O, BP-350 W, BP-350 WS, BP-351 O, BP-351 W, BP-351 WS
Show more details
- Suitable bolts:
- 2x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- XP6
- Picture no.:
- 13
- suitable for plough body:
- BP-232 O, BP-233 O, BP-233 OS, BP-234 OS, BP-320 W, BP-321 P, BP-321 PS, BP-321 W, BP-322 P, BP-322 PS, BP-323 PS, BP-325 W, BP-330 WS, BP-331 WS, BP-350 O, BP-350 W, BP-350 WS, BP-351 O, BP-351 W, BP-351 WS
Show more details
- Bolts with nuts included:
- 2 x 1801235810
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Designation:
- XP6
- Picture no.:
- 13
- suitable for plough body:
- BP-232 O, BP-233 O, BP-233 OS, BP-234 OS, BP-320 W, BP-321 P, BP-321 PS, BP-321 W, BP-322 P, BP-322 PS, BP-323 PS, BP-325 W, BP-330 WS, BP-331 WS, BP-350 O, BP-350 W, BP-350 WS, BP-351 O, BP-351 W, BP-351 WS
Show more details
- Suitable bolts:
- 1 x 1801240810 + 1 x 1801295810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- NG71
- Picture no.:
- 9
- suitable for plough body:
- BP-321 P, BP-321 PS, BP-322 P, BP-322 PS, BP-323 PS, BP-350 O, BP-351 O
Show more details
- Suitable bolts:
- 1 x 1801240810 + 1 x 1801295810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- NG71L
- Picture no.:
- 9
- suitable for plough body:
- BP-321 P, BP-321 PS, BP-322 P, BP-322 PS, BP-323 PS, BP-350 O, BP-351 O
Show more details
- Suitable bolts:
- 2x 1801240810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- UP9
- Picture no.:
- 14
- suitable for plough body:
- BP-232 O, BP-233 O, BP-233 OS, BP-234 OS, BP-320 W, BP-321 P, BP-321 W, BP-322 P, BP-325 W, BP-330 WS, BP-331 WS, BP-350 O, BP-350 W, BP-350 WS, BP-351 O, BP-351 W, BP-351 WS
Show more details
- Bolts with nuts included:
- 2 x 1801240810
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Designation:
- UP9
- Picture no.:
- 14
- suitable for plough body:
- BP-232 O, BP-233 O, BP-233 OS, BP-234 OS, BP-320 W, BP-321 P, BP-321 W, BP-322 P, BP-325 W, BP-330 WS, BP-331 WS, BP-350 O, BP-350 W, BP-350 WS, BP-351 O, BP-351 W, BP-351 WS
Show more details
- Suitable bolts:
- 2x 1801240810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- UP9L
- Picture no.:
- 14
- suitable for plough body:
- BP-232 O, BP-233 O, BP-233 OS, BP-234 OS, BP-320 W, BP-321 P, BP-321 W, BP-322 P, BP-325 W, BP-330 WS, BP-331 WS, BP-350 O, BP-350 W, BP-350 WS, BP-351 O, BP-351 W, BP-351 WS
Show more details
- Bolts with nuts included:
- 2 x 1801240810
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Designation:
- UP9
- Picture no.:
- 14
- suitable for plough body:
- BP-232 O, BP-233 O, BP-233 OS, BP-234 OS, BP-320 W, BP-321 P, BP-321 W, BP-322 P, BP-325 W, BP-330 WS, BP-331 WS, BP-350 O, BP-350 W, BP-350 WS, BP-351 O, BP-351 W, BP-351 WS
Show more details
GRANIT replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.