BP-330 WS
- To fit:
- Rabe
- Suitable bolts:
- 2x 1801237R
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- MP350
- Picture no.:
- 8
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS, BP-350 W, BP-350 WS
Show more details
- Bolts with nuts included:
- 2 x 1801237R
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Designation:
- MP350
- Picture no.:
- 8
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS, BP-350 W, BP-350 WS
Show more details
- To fit:
- Rabe
- Suitable bolts:
- 2x 1801237R
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- MP350L
- Picture no.:
- 8
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS, BP-350 W, BP-350 WS
Show more details
- Bolts with nuts included:
- 2 x 1801237R
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Designation:
- MP350L
- Picture no.:
- 8
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS, BP-350 W, BP-350 WS
Show more details
- Suitable bolts:
- 2x 1801237R
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 8
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS, BP-350 W, BP-350 WS
Show more details
- Bolts with nuts included:
- 2 x 1801237R
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Picture no.:
- 8
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS, BP-350 W, BP-350 WS
Show more details
- Suitable bolts:
- 2x 1801237R
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 8
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS, BP-350 W, BP-350 WS
Show more details
- Bolts with nuts included:
- 2 x 1801237R
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Picture no.:
- 8
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS, BP-350 W, BP-350 WS
Show more details
- To fit:
- Rabe
- Suitable bolts:
- 2x 1801240R
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 8
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS,BP-350 W, BP-350 WS
Show more details
- To fit:
- Rabe
- Suitable bolts:
- 2x 1801240R
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 8
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS,BP-350 W, BP-350 WS
Show more details
- To fit:
- Rabe
- Suitable bolts:
- 4x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- SSP350WSE/WS
- Picture no.:
- 7
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS, BP-350 W, BP-350 WS
Show more details
- Bolts with nuts included:
- 4 x 1801235810
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Designation:
- SSP350WSE/WS
- Picture no.:
- 7
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS, BP-350 W, BP-350 WS
Show more details
- To fit:
- Rabe
- Suitable bolts:
- 4x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- SSP350WSEL/WS
- Picture no.:
- 7
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS, BP-350 W, BP-350 WS
Show more details
- Bolts with nuts included:
- 4 x 1801235810
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Designation:
- SSP350WSEL/WS
- Picture no.:
- 7
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS, BP-350 W, BP-350 WS
Show more details
- Total length (mm):
- 640
- Suitable bolts:
- 4x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- SSP350WEP
- Picture no.:
- 6
- suitable for plough body:
- BP-320W, BP-325 W, BP-330WS, BP-350 W, BP-350 WS
Show more details
- Suitable bolts:
- 4x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- SSP350WELP
- Picture no.:
- 6
- suitable for plough body:
- BP-320W, BP-325 W, BP-330WS, BP-350 W, BP-350 WS
Show more details
- Suitable bolts:
- 3x 1801235810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- VRP330W
- Picture no.:
- 5
- suitable for plough body:
- Streifenkörper BP-330 WS
Show more details
This item cannot be returned or cancelled as it is classed as a special order.
- Bolts with nuts included:
- 3 x 1801235810
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Designation:
- VRP330W
- Picture no.:
- 5
- suitable for plough body:
- Streifenkörper BP-330 WS
Show more details
- Suitable bolts:
- 3x 1801235810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- VRP330WL
- Picture no.:
- 5
- suitable for plough body:
- Streifenkörper BP-330 WS
Show more details
This item cannot be returned or cancelled as it is classed as a special order.
- Bolts with nuts included:
- 3 x 1801235810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- VRP330WL
- Picture no.:
- 5
- suitable for plough body:
- Streifenkörper BP-330 WS
Show more details
- Suitable bolts:
- 2x 1801235RA
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- SRP330W
- Picture no.:
- 4
- suitable for plough body:
- Streifenkörper BP-330 WS
Show more details
- Suitable bolts:
- 2x 1801235RA
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- SRP330WL
- Picture no.:
- 4
- suitable for plough body:
- Streifenkörper BP-330 WS
Show more details
- Suitable bolts:
- 2x 1801235RA
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- SRP330W
- Picture no.:
- 3
- suitable for plough body:
- Streifenkörper BP-330 WS
Show more details
- Bolts with nuts included:
- 2 x 1801235RA
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Designation:
- SRP330W
- Picture no.:
- 3
- suitable for plough body:
- Streifenkörper BP-330 WS
Show more details
- Suitable bolts:
- 2x 1801235RA
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- SRP330WL
- Picture no.:
- 3
- suitable for plough body:
- Streifenkörper BP-330 WS
Show more details
- Bolts with nuts included:
- 2 x 1801235RA
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Designation:
- SRP330WL
- Picture no.:
- 3
- suitable for plough body:
- Streifenkörper BP-330 WS
Show more details
- Suitable bolts:
- 2x 1801235RA
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- SRP330W
- Picture no.:
- 2
- suitable for plough body:
- Streifenkörper BP-330 WS
Show more details
- Bolts with nuts included:
- 2 x 1801235RA
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Designation:
- SRP330W
- Picture no.:
- 2
- suitable for plough body:
- Streifenkörper BP-330 WS
Show more details
- Suitable bolts:
- 2x 1801235RA
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- SRP330WL
- Picture no.:
- 2
- suitable for plough body:
- Streifenkörper BP-330 WS
Show more details
- Bolts with nuts included:
- 2 x 1801235RA
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Designation:
- SRP330WL
- Picture no.:
- 2
- suitable for plough body:
- Streifenkörper BP-330 WS
Show more details
- Suitable bolts:
- 2x 1801235HU10
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- SRP330W
- Picture no.:
- 1
- suitable for plough body:
- Streifenkörper BP-330 WS
Show more details
- Suitable bolts:
- 2x 1801235HU10
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- SRP330WL
- Picture no.:
- 1
- suitable for plough body:
- Streifenkörper BP-330 WS
Show more details
- Suitable bolts:
- 1x 1801240810 + 1x 1801290810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- VP351W
- Picture no.:
- 10
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS, BP-340 W, BP-341 W, BP-350 W, BP-350 WS
Show more details
- Bolts with nuts included:
- 1 x 1801240810 + 1 x 1801290810
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Designation:
- VP351W
- Picture no.:
- 10
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS, BP-340 W, BP-341 W, BP-350 W, BP-350 WS
Show more details
- Suitable bolts:
- 1 x 1801240810 + 1 x 1801290810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- WP351W
- Picture no.:
- 11
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS, BP-340 W, BP-341 W, BP-350 W, BP-350 WS
Show more details
- Bolts with nuts included:
- 1 x 1801240810 + 1 x 1801290810
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Designation:
- WP351W
- Picture no.:
- 11
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS, BP-340 W, BP-341 W, BP-350 W, BP-350 WS
Show more details
GRANIT XP-61 plant saver
Part no.:11538357
- Suitable bolts:
- 2 x 1801240810
- Designation:
- XP-61
- Picture no.:
- 14
- suitable for plough body:
- BP-350 WS(L, BP-350 W, BP-330 WS, BP-331 WS, BP-351 WS(L
Show more details
This item cannot be returned or cancelled as it is classed as a special order.
- Suitable bolts:
- 2x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- YP350W
- Picture no.:
- 9
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS, BP-350 W, BP-350 WS
Show more details
- Bolts with nuts included:
- 2 x 1801235810
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Designation:
- YP350W
- Picture no.:
- 9
- suitable for plough body:
- BP-320 W, BP-324 W, BP-330 WS, BP-350 W, BP-350 WS
Show more details
GRANIT replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.