ARAG Spraying computer Bravo 300S RCU
Ways: 7 Hydraulic function: 7 ;
Part no.: 67046732711
Further information
- To be found in category:
- ElectricsPrecision farmingARAG spraying computersSpraying computer Bravo 180S300S RCU
The remote control unit (RCU) is a control unit that communicates with the computer using the CANBUS protocol via a single cable. This unit offers simplified installation, particularly on drawn machinery, and allows you to control the hydraulic power units for the purpose of linkage movement. Transferring from one agricultural machine to another is considerably simplified as only a small cable must be detached in order to separate the monitor from the rest of the system. The special plug with slide connection and the waterproof case make the installation safe even at the points susceptible to splashing or atmospheric influences.
General features
• Automatic nozzle selection during treatment (only for Selejet version)
• Automatic management of boom section closure to avoid overlaps in conjunction with skipper.
• Management of application with variable metering in conjunction with skipper.
• SD memory card for storing the work performed, saving/loading the configuration and software update.
• Nozzle wear control by simultaneous recording of pressure and flow rate.
• Graphical tank level indicator.
General features
• Automatic nozzle selection during treatment (only for Selejet version)
• Automatic management of boom section closure to avoid overlaps in conjunction with skipper.
• Management of application with variable metering in conjunction with skipper.
• SD memory card for storing the work performed, saving/loading the configuration and software update.
• Nozzle wear control by simultaneous recording of pressure and flow rate.
• Graphical tank level indicator.
• Selectable data: current metering, output metering, speed, pressure, application rate, applied quantity, tank level, speed, area treated, treatment duration, productivity, date, time, distance travelled.
• Nozzle wear control by simultaneous recording of pressure and flow rate.
• Automatic control of the spray function if the input pressure falls below the minimum, meaning that the nozzles can only operate within their application range.
• Automatic closure of the main switching valve if the speed falls below the minimum set by the user.
• Alarms for: set metering is not available, tank reserve, min./max. working pressure of each nozzle, min./max. speed, flow meter over scale range, excessive nozzle wear.
• Automatic transfer to pressure sensor function when the flow meter is no longer within the preset limits.
• Short-term increase or reduction of the application rate.
• Stores up to 19 metering/nozzle combinations that must be retrieved before the start of treatment.
• Automatic control of output by detecting the application rate and/or pressure (via flow meter or pressure sensor).
LED indicating the active side of the foam marker and valve status.
Technical features
• Integrated reader for Secure Digital memory cards (SD).
• Input for external control of the main switching valve.
• Control unit RCU.
• RS232 serial port for connection to GPS or skipper.
• Self-powered internal clock.
• Inputs for the following signals: application rate, speed, pressure, filling pressure, tachometer, Pump Protector.
• Outputs to control up to 7 boom sections (13 in the case of the sequential version), control valve, main switching valve and foam marker.
• Outputs to control up to 9 hydraulic functions and drain valve.
• Available languages: Italian, English, French, Portuguese, Spanish, Czech, Russian, German and Polish.
• Selectable units: international (ha, km/h) and American system (Ac, mph).
• Backlit graphic display 240x73 pixels.
• Supply voltage 12 Vdc
• Nozzle wear control by simultaneous recording of pressure and flow rate.
• Automatic control of the spray function if the input pressure falls below the minimum, meaning that the nozzles can only operate within their application range.
• Automatic closure of the main switching valve if the speed falls below the minimum set by the user.
• Alarms for: set metering is not available, tank reserve, min./max. working pressure of each nozzle, min./max. speed, flow meter over scale range, excessive nozzle wear.
• Automatic transfer to pressure sensor function when the flow meter is no longer within the preset limits.
• Short-term increase or reduction of the application rate.
• Stores up to 19 metering/nozzle combinations that must be retrieved before the start of treatment.
• Automatic control of output by detecting the application rate and/or pressure (via flow meter or pressure sensor).
LED indicating the active side of the foam marker and valve status.
Technical features
• Integrated reader for Secure Digital memory cards (SD).
• Input for external control of the main switching valve.
• Control unit RCU.
• RS232 serial port for connection to GPS or skipper.
• Self-powered internal clock.
• Inputs for the following signals: application rate, speed, pressure, filling pressure, tachometer, Pump Protector.
• Outputs to control up to 7 boom sections (13 in the case of the sequential version), control valve, main switching valve and foam marker.
• Outputs to control up to 9 hydraulic functions and drain valve.
• Available languages: Italian, English, French, Portuguese, Spanish, Czech, Russian, German and Polish.
• Selectable units: international (ha, km/h) and American system (Ac, mph).
• Backlit graphic display 240x73 pixels.
• Supply voltage 12 Vdc