Ford
Types: 3000, 4000, 5000
GRANIT Control unit
Optionally switchable between sa and da
This control valve is a 5/3-way valve with sandwich construction, connected in parallel. It can be switched between double- and single-acting. It is equipped with spring return and adjustable locking as standard. It has a connection ZZ for the additional power multiplication cylinder. Gasket set, bolt kit and lever included in basic equipment. Two each screws 7/16"-14 x 3 1/2" and 7/16"-14 x 5" are included in delivery.
Part no.:85219032
- Technical data:
- max. operating pressure: 210 bar
nominal flow: max. 50l/min.
tightening torque: 30 Nm
dimensions: 200 x 185 x 65 mm
This item cannot be returned or cancelled as it is classed as a special order.
GRANIT Control unit
Can be switched between sa and da, with float position with detent and limit stop adjustable from 150 - 210 bar
Part no.:85219130
- Description:
- This control unit is a 5/4-way valve that is manually operated to control single- and double-acting cylinders and hydraulic motors. This control valve has been specially developed for Fiatagri tractors with Kontak hydraulics. Thanks to the high output, up to four control valves can be flanged directly. As the hole pattern is identical to Kontak, this valve can also be fitted with original Kontak control valves. The aforementioned control valve is a four-position device. It can be switched from double- to single-acting and vice versa. It is a gate-sealed control valve with neutral fine control, meaning that very low fit leakage is permitted, even at the highest pressure. The device has a latched safety limit stop in the lift position. When switching via the lower position, the latched float position is reached. This can be returned to the neutral position by hand at any time.
GRANIT Operating cable
Part no.:85217000
GRANIT Gasket set
Part no.:85286016
GRANIT Lever assembly
Part no.:85299005
- Technical data:
- can be used in 90, 94 and Winner
GRANIT Gasket set
Part no.:85286098
GRANIT Bolt set
Part no.:85295015
- Technical data:
- M10 x 120
GRANIT Bolt set
Part no.:85295016
- Technical data:
- M10 x 160
GRANIT Bolt set
Part no.:85295017
- Technical data:
- M10 x 200
- Technical data:
- max. operating pressure: 210 bar
nominal flow: max. 70l/min.
tightening torque: 30 Nm
dimensions: 160 x 110 x 32 mm - Description:
- This sandwich plate is mounted between the transmission and the transmission cover or control valve. The plate has a hydraulic connection on the side for the rear hydraulics auxiliary cylinder.
GRANIT Gasket set
for control unit 85219130 flange surface with O-ring and support ring
Part no.:85286126
GRANIT replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.