GRANIT threadlocker

Threadlocking with GRANIT threadlockers saves costs. Instead of special safety screws, normal shank screws can be used which are much cheaper.
GRANIT threadlockers meet the highest demands on the capacity of a screw connection. They are used for shock- and vibration-resistant securing of transversely and axially loaded threaded connections of all kinds.
The adhesive produces a material connection, and also serves as a seal for the thread gap and provides optimum protection against corrosion.

Full list

GRANIT Threadlocker

Part no.:320320075

Version:

Medium strength - high viscosity - can be dismantled

Container:

24 g

Colour:

Dark blue

Description:

• Vibration-resistant
• Single-component product - clean and easy to apply
• Suitable for all thread types and shapes
• Also seals the thread
• Single-component adhesive that hardens in the absence of air when it comes into contact with metal
• Easily, securely and permanently bonds, seals and secures screw connections, joints, bearings and pipe connections
• Replaces conventional fixing methods such as split pins, spring washers and washers

Technical data:

• Base: methacrylate ester
• Colour: dark blue
• Odour: characteristic
• Viscosity (25°C): 2000-7500 mPa.s
• Density (25°C): 1.05 g/cm³
• Temperature resistance: -55°C to +150°C max.
• Gap filling capacity: 0.25 mm
• Breakaway torque: MLB (DIN EN ISO 10964): 17-22 Nm
• Shear strength (DIN 54452): 9-13 N/mm²
• Can be handled after: 10-20 min.
• Functional strength: 1-3 hours
• Final strength: 12 hours
• Shelf life: 24 months
• Max. thread: 36
• Strength class (DIN 30661): 2
• Flash point: >100°C

Packing type:

Bottle

Processing/application conditions:

Clean the parts to be connected. Apply sufficient adhesive and assemble parts. Immediate assembly is not necessary as the material only reacts after the parts have been assembled.
Anaerobic liquid plastics do not react with metal/plastic combinations, an activator must be used here.
Different types with different strengths and viscosities enable precise adjustment to your application, and are crucial for the success of the bond.
Curing can be greatly accelerated by activators.

Show more details

Dealer locator

GRANIT Threadlocker

Part no.:320320077

Version:

High strength - medium viscosity - difficult to dismantle

Container:

24 g

Colour:

Green

Description:

• Vibration-resistant
• Single-component product - clean and easy to apply
• Suitable for all thread types and shapes
• Also seals the thread
• Single-component adhesive that hardens in the absence of air when it comes into contact with metal
• Easily, securely and permanently bonds, seals and secures screw connections, joints, bearings and pipe connections
• Replaces conventional fixing methods such as split pins, spring washers and washers

Technical data:

• Base: methacrylate ester
• Colour: green
• Odour: characteristic
• Viscosity (25°C): 400-700 mPa.s
• Density (25°C): 1.10 g/cm³
• Temperature resistance: -55°C to +150°C
• Max. gap filling capacity: 0.15 mm
• Breakaway torque: MLB (DIN EN ISO 10964): 28-35 Nm
• Shear strength (DIN 54452): 15-20 N/mm²
• Can be handled after: 15-30 min.
• Functional strength: 1-3 hours
• Final strength: 12 hours
• Shelf life: 24 months
• Max. thread: 20
• Strength class (DIN 30661): 3
• Flash point: >100°C

Packing type:

Bottle

Processing/application conditions:

Clean the parts to be connected. Apply sufficient adhesive and assemble parts. Immediate assembly is not necessary as the material only reacts after the parts have been assembled.
Anaerobic liquid plastics do not react with metal/plastic combinations, an activator must be used here.
Different types with different strengths and viscosities enable precise adjustment to your application, and are crucial for the success of the bond.
Curing can be greatly accelerated by activators.

Show more details

Dealer locator

GRANIT Threadlocker

Part no.:320320076

Version:

Medium strength - high viscosity - can be dismantled

Container:

50 g

Colour:

Dark blue

Description:

• Vibration-resistant
• Single-component product - clean and easy to apply
• Suitable for all thread types and shapes
• Also seals the thread
• Single-component adhesive that hardens in the absence of air when it comes into contact with metal
• Easily, securely and permanently bonds, seals and secures screw connections, joints, bearings and pipe connections
• Replaces conventional fixing methods such as split pins, spring washers and washers

Technical data:

• Base: methacrylate ester
• Colour: dark blue
• Odour: characteristic
• Viscosity (25°C): 2000-7500 mPa.s
• Density (25°C): 1.05 g/cm³
• Temperature resistance: -55°C to +150°C max.
• Gap filling capacity: 0.25 mm
• Breakaway torque: MLB (DIN EN ISO 10964): 17-22 Nm
• Shear strength (DIN 54452): 9-13 N/mm²
• Can be handled after: 10-20 min.
• Functional strength: 1-3 hours
• Final strength: 12 hours
• Shelf life: 24 months
• Max. thread: 36
• Strength class (DIN 30661): 2
• Flash point: >100°C

Packing type:

Bottle

Processing/application conditions:

Clean the parts to be connected. Apply sufficient adhesive and assemble parts. Immediate assembly is not necessary as the material only reacts after the parts have been assembled.
Anaerobic liquid plastics do not react with metal/plastic combinations, an activator must be used here.
Different types with different strengths and viscosities enable precise adjustment to your application, and are crucial for the success of the bond.
Curing can be greatly accelerated by activators.

Show more details

Dealer locator

GRANIT Threadlocker

Part no.:320320078

Version:

High strength - medium viscosity - difficult to dismantle

Container:

50 g

Colour:

Green

Description:

• Vibration-resistant
• Single-component product - clean and easy to apply
• Suitable for all thread types and shapes
• Also seals the thread
• Single-component adhesive that hardens in the absence of air when it comes into contact with metal
• Easily, securely and permanently bonds, seals and secures screw connections, joints, bearings and pipe connections
• Replaces conventional fixing methods such as split pins, spring washers and washers

Technical data:

• Base: methacrylate ester
• Colour: green
• Odour: characteristic
• Viscosity (25°C): 400-700 mPa.s
• Density (25°C): 1.10 g/cm³
• Temperature resistance: -55°C to +150°C
• Max. gap filling capacity: 0.15 mm
• Breakaway torque: MLB (DIN EN ISO 10964): 28-35 Nm
• Shear strength (DIN 54452): 15-20 N/mm²
• Can be handled after: 15-30 min.
• Functional strength: 1-3 hours
• Final strength: 12 hours
• Shelf life: 24 months
• Max. thread: 20
• Strength class (DIN 30661): 3
• Flash point: >100°C

Packing type:

Bottle

Processing/application conditions:

Clean the parts to be connected. Apply sufficient adhesive and assemble parts. Immediate assembly is not necessary as the material only reacts after the parts have been assembled.
Anaerobic liquid plastics do not react with metal/plastic combinations, an activator must be used here.
Different types with different strengths and viscosities enable precise adjustment to your application, and are crucial for the success of the bond.
Curing can be greatly accelerated by activators.

Show more details

Dealer locator