Cultivator points
GRANIT Narrow share
Part no.:56017 33710006
- Dimensions (mm):
- 590 x 60 x 25
- Suitable bolts:
- 1x 1801255812
1 x 1801280812 - Types:
- Carat, crystal
- Thickness (mm):
- 25
- No. of holes:
- 2
- Working width (mm):
- 60
- Length (mm):
- 590
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Description:
- 6 grit
Show more details
GRANIT Flat share
Part no.:56017 3374351
- Dimensions (mm):
- 240
- Suitable bolts:
- 4 x 1801025810
- Types:
- Topas
- No. of holes:
- 4
- Working width (mm):
- 240
- Hole spacing (mm):
- 100
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Description:
- F 24
Show more details
- Dimensions (mm):
- 273.4 x 80
- Suitable bolts:
- 1x 1801250812
- Types:
- Karat
- Colour:
- Black
- No. of holes:
- 1
- Working width (mm):
- 80
- Width (mm):
- 80
- Length (mm):
- 273,4
- To fit:
- Lemken
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Hard metal plate on the underside is embedded in a triangular shape in the base body - breakages are almost impossible
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixing of the soldering material is crucial
• Low-wear design
• Top performance at a great price
• Easy insertion into the ground and lower fuel consumption thanks to consistently sharp tools
• Significantly longer service life compared with standard tools (factor of 7-10, depending on the soil)
• No readjustment of the tool depth due to wear
• Time and cost savings due to fewer share changes
• Made in Germany
Show more details
- Dimensions (mm):
- 260 x 120 x 12
- Suitable bolts:
- 1x 1801260812
- Types:
- Karat, Kristall
- Thickness (mm):
- 12
- No. of holes:
- 1
- Working width (mm):
- 120
- Length (mm):
- 260
- To fit:
- Lemken
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Description:
- K12P
Show more details
- Dimensions (mm):
- 303x80
- Suitable bolts:
- 1801250812
- Types:
- Karat
- Colour:
- schwarz
- Working width (mm):
- 80
- Width (mm):
- 80
- Length (mm):
- 303
- To fit:
- Lemken
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Hard metal plate on the underside is embedded in a triangular shape in the base body - breakages are almost impossible
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout, (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixing of the soldering material is crucial
• Low-wear design
• Excellent price-performance ratio
• Easy insertion into the ground and lower fuel consumption thanks to consistently sharp tools
• Significantly longer service life compared with standard tools (factor of 7-10, depending on the soil)
• No readjustment of the tool depth due to wear
• Time and cost savings due to fewer share changes
• Made in Germany
Show more details
- Dimensions (mm):
- 220x120
- Suitable bolts:
- 1801240812
- Types:
- Emerald, Topaz
- Colour:
- Black
- No. of holes:
- 1
- Working width (mm):
- 120
- Width (mm):
- 120
- Length (mm):
- 220
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Hard metal plate on the underside is embedded in a triangular shape in the base body - breakages are almost impossible
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout, (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixing of the soldering material is crucial
• Low-wear design
• Excellent price-performance ratio
• Easy insertion into the ground and lower fuel consumption thanks to consistently sharp tools
• Significantly longer service life compared with standard tools (factor of 7-10, depending on the soil)
• No readjustment of the tool depth due to wear
• Time and cost savings due to fewer share changes
• Made in Germany
Show more details
- Dimensions (mm):
- 260 x 80 x 14
- Suitable bolts:
- 1x 1801260812
- Types:
- Carat
- Thickness (mm):
- 14
- No. of holes:
- 1
- Working width (mm):
- 80
- Length (mm):
- 265
- To fit:
- Lemken Karat
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Description:
- K8P
Show more details
- Dimensions (mm):
- 230 x 120 x 12
- Suitable bolts:
- 1x 1801235812
- Types:
- Smaragd, Achat, Thorit
- Thickness (mm):
- 12
- No. of holes:
- 1
- Working width (mm):
- 120
- Length (mm):
- 230
- Version:
- S12P, underside with hard metal coating, 120 x 12 mm
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
Show more details
GRANIT Narrow share
Part no.:180101.LEM-03
- Dimensions (mm):
- 455 x 60 x 15
- Suitable bolts:
- 1801250810
- Types:
- Achat, Thorit
- Thickness (mm):
- 15
- No. of holes:
- 2
- Working width (mm):
- 60
- Length (mm):
- 455
- Hole spacing (mm):
- 45
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Description:
- A 6
Show more details
- Dimensions (mm):
- 120 x 15
- Suitable bolts:
- 1x 1801235812
- Types:
- Smaragd
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
Show more details
- Dimensions (mm):
- 510 x 60 x 20
- Suitable bolts:
- 2x 1801255812
- Types:
- Achat, Thorit
- No. of holes:
- 2
- Working width (mm):
- 60
- Hole spacing (mm):
- 45
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
Show more details
GRANIT Share point
Part no.:56017 3374388
- Dimensions (mm):
- 230 x 120 x 10
- Suitable bolts:
- 1x 1801235812
- Types:
- Smaragd, Achat, Thorit
- Thickness (mm):
- 10
- No. of holes:
- 1
- Working width (mm):
- 120
- Length (mm):
- 230
- To fit:
- Lemken, Saphir, various
- Version:
- S12, 120 x 10 mm
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
Show more details
GRANIT replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.