Body 36W
- Suitable bolts:
- 2 x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 7
- suitable for plough body:
- 36W
Show more details
- Suitable bolts:
- 2 x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 7
- suitable for plough body:
- 36W
Show more details
- Suitable bolts:
- 6 x 18012351410
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 1
- suitable for plough body:
- 36 W
Show more details
This item cannot be returned or cancelled as it is classed as a special order.
- Bolts with nuts included:
- 6 x 18012351410
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Picture no.:
- 1
- suitable for plough body:
- 36 W
Show more details
- Suitable bolts:
- 6 x 18012351410
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 1
- suitable for plough body:
- 36 W
Show more details
This item cannot be returned or cancelled as it is classed as a special order.
- Bolts with nuts included:
- 6 x 18012351410
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Picture no.:
- 1
- suitable for plough body:
- 36 W
Show more details
- Suitable bolts:
- 2x 1801235HU10
- Picture no.:
- 8
- suitable for plough body:
- 36W
- Suitable bolts:
- 2x 1801235HU10
- Picture no.:
- 8
- suitable for plough body:
- 36W
- Thickness (mm):
- 12
- Hole spacing (mm):
- 40
- To fit:
- Kverneland
- Suitable bolts:
- 2x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 4
- suitable for plough body:
- 36 W, 41 W, 46 W
Show more details
- To fit:
- Kverneland
- Suitable bolts:
- 2x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 4
- suitable for plough body:
- 36 W, 41 W, 46 W
Show more details
- Suitable bolts:
- 3x 18012351410
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard tip dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 2
- suitable for plough body:
- 36 W
Show more details
This item cannot be returned or cancelled as it is classed as a special order.
- Bolts with nuts included:
- 3 x 18012351410
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Picture no.:
- 2
- suitable for plough body:
- 36 W
Show more details
GRANIT replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.