LSK FK Ceramicon
In combination with the 10 mm flap overhang and the sturdy belt back, these grinding discs offer an above-average service life for effectively processing fillet welds. Thanks to the high inherent strength of the abrasive material, the flap disc can be adapted to the workpiece by means of profiling. The ceramic grain results in a high material removal rate. Ideal for fillet weld grinding and fine surfaces (up to 80 grit).
For the following materials:
• Stainless and acid-resistant steels
• High-alloy steels
• Hardox
• Tool steels
• Hardened steels
• Aluminium
Info:
For optimum results, a powerful machine from 1000 W (Ø 115 mm) or 1200 W (Ø 125 mm) is required.
- Type/form:
- Angled
- Ø (mm):
- 115
- Hole (mm):
- 22,2
- Grit:
- 40 grit
- Dimensions (mm):
- 115 x 22.2
- Max. rpm:
- 13300 U/min
Show more details
This item cannot be returned or cancelled as it is classed as a special order.
- Type/form:
- Angled
- Ø (mm):
- 115
- Hole (mm):
- 22,2
- Grit:
- 60 grit
- Dimensions (mm):
- 115 x 22.2
- Max. rpm:
- 13300 U/min
Show more details
- Type/form:
- Angled
- Ø (mm):
- 115
- Hole (mm):
- 22,2
- Grit:
- 80 grit
- Dimensions (mm):
- 115 x 22.2
- Max. rpm:
- 13300 U/min
Show more details
- Type/form:
- Angled
- Ø (mm):
- 125
- Hole (mm):
- 22,2
- Grit:
- 40 grit
- Dimensions (mm):
- 125 x 22.2
- Max. rpm:
- 12250 U/min
Show more details
- Type/form:
- Angled
- Ø (mm):
- 125
- Hole (mm):
- 22,2
- Grit:
- 60 grit
- Dimensions (mm):
- 125 x 22.2
- Max. rpm:
- 12250 U/min
Show more details
- Type/form:
- Angled
- Ø (mm):
- 125
- Hole (mm):
- 22,2
- Grit:
- 80 grit
- Dimensions (mm):
- 125 x 22.2
- Max. rpm:
- 12250 U/min
Show more details
Original spare part numbers are for comparison purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.