Massey Ferguson
GRANIT Distributor
Part no.:85215008
GRANIT Solenoid valve
Part no.:85215073
- Technical data:
- max. operating pressure: 210 bar
nominal flow: max. 50l/min.
tightening torque: 30 Nm
connections: M18 x 1.5
dimensions: 200 x 75 x 75 mm - Description:
- This auxiliary control unit is a 5/3-way valve, manually operated to control single- and double-acting cylinders and hydraulic motors. It consists of a base valve and a directional control valve. The directional control valve is designed as an end valve and can be switched from single- to double-acting and vice versa. It is a gate-sealed control valve which has neutral fine control and allows very low fit leakage, even at the highest pressure. The directional control valve is flanged and can be expanded with the flange valve with a double-acting function.
GRANIT Reversing valve
Valve is not suitable for 100 series tractors with pressure modulator.
Use only with intermediate plate MF117/2P
Part no.:85215002
- Technical data:
- 2 threaded connections 3/8" BSP
This item cannot be returned or cancelled as it is classed as a special order.
GRANIT Control unit
Can be switched between sa and da, with float position with detent and limit stop adjustable from 150 - 210 bar
Part no.:85219130
- Technical data:
- Max. operating pressure: 220 bar
Nominal flow rate: max. 70 l/min
Tightening torque: 30 Nm
Connections: M18 x 1.5
Dimensions: 210 x 95 x 40 mm
Screw connection: 3x M10
Hole pattern identical to the Parker/Kontak system - Description:
- This control unit is a 5/4-way valve that is manually operated to control single- and double-acting cylinders and hydraulic motors. This control valve has been specially developed for Fiatagri tractors with Kontak hydraulics. Thanks to the high output, up to four control valves can be flanged directly. As the hole pattern is identical to Kontak, this valve can also be fitted with original Kontak control valves. The aforementioned control valve is a four-position device. It can be switched from double- to single-acting and vice versa. It is a gate-sealed control valve with neutral fine control, meaning that very low fit leakage is permitted, even at the highest pressure. The device has a latched safety limit stop in the lift position. When switching via the lower position, the latched float position is reached. This can be returned to the neutral position by hand at any time.
This item cannot be returned or cancelled as it is classed as a special order.
GRANIT Gasket set
for control unit 85219130 flange surface with O-ring and support ring
Part no.:85286126
GRANIT replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.