Tractor types: 2040, 2140, 3040, 3140, 3640, 2650, 2850, 3050, 3350
- Contents:
- Pressure plate 458133060210,
clutch plate 458333004211 - Disc Ø (mm):
- 327
- Picture no.:
- 1
LUK Single clutch 330DGVM
Please ensure that the flywheel has an inner diameter of 330.5 ± 0.3 mm and an installation depth of 21.6 ± 0.25 mm.
- Dimensions (inches):
- 1 3/4"
27 grooves - Flywheel dimension (mm):
- 21,6
- Description:
- Driving clutch
- Picture no.:
- 2
- Dimensions (inches):
- 1 1/4" 10 grooves
- Material specifications:
- Organic clutch lining
- Picture no.:
- 3
- Dimensions (inches):
- 1 1/4" 10 grooves
- Material specifications:
- Sintered clutch lining
- Picture no.:
- 4
- Dimensions (inches):
- 1 1/4" 10 grooves
- Material specifications:
- Organic clutch lining
- Picture no.:
- 5
- Dimensions (inches):
- 1 1/4" 10 grooves
- Material specifications:
- Sintered clutch lining
- Picture no.:
- 6
- Dimensions (mm):
- 22.3 x 25.8
15 grooves - Material specifications:
- Organic clutch lining
- Picture no.:
- 7
- Dimensions (mm):
- 22.3 x 25.8
15 grooves - Material specifications:
- Sintered clutch lining
- Picture no.:
- 8
- Dimensions (mm):
- 22.3 x 25.8
15 grooves - Material specifications:
- Sintered clutch lining
- Picture no.:
- 9
- Dimensions (mm):
- 49.5 x 93.5
- Picture no.:
- 10
LUK Central release bearing
2 connections
Hydraulic
Only use brake fluid with the specification DOT3, DOT4, DOT4+, SAE 1730. Before installing and bleeding the central release bearing, all tanks, units and connections must be thoroughly cleaned to remove any traces of other oils and greases, etc. If the brake fluid in the central release bearing is contaminated, the seal will fail immediately.
- Dimensions (mm):
- 45.5 x 95 x 105
- Picture no.:
- 11
LUK Central release bearing
3 connections
For use with two connections, please order 1x pipe plug 44512068 and 1x O-ring 44512069 at the same time.
Only use brake fluid with the specification DOT3, DOT4, DOT4+, SAE 1730. Before installing and bleeding the central release bearing, all tanks, units and connections must be thoroughly cleaned to remove any traces of other oils and greases, etc. If the brake fluid in the central release bearing is contaminated, the seal will fail immediately.
- Picture no.:
- 12