Accessories CTEK
- Version:
- • 8.4 mm ring cable lugs, 550 mm cable
• 15 A fuse, indicator light.
• Use for small batteries, perfect for motorcycles, lawnmowers, quad bikes, etc.
• The device can be installed permanently, meaning that the battery’s state of charge can be viewed at any time.
• Pre-wired by CTEK.
CTEK Quick contact cable
Part no.:50799131
- Version:
- Approx. length 400 mm, with 2 ring eyelets M6
- Version:
- • Original CTEK clamps, 1500 mm cable
• 15 A fuse, indicator light.
• Suitable for vehicle dealers, helps to avoid flat vehicle batteries. Reduce the number of complaints about batteries by ensuring that the vehicle battery’s state of charge is always maintained
- Version:
- • 8.4 mm ring cable lugs, 1500 mm cable
• 15 A fuse, indicator light.
• Size: 35 mm x 21 mm x 50 mm
• Suitable for larger vehicles and boats, professional users can now see the state of charge even if the battery is difficult to access. With the display panel you will immediately see the battery status on the instrument panel of any vehicle.
CTEK Quick contact cable
Part no.:50788021
- Version:
- Approx. length 400 mm, with 2 ring eyelets M8
- Version:
- Checks the charging status of hard-to-reach batteries, eyelet M8 8.4 mm
The indicator makes it easy to monitor the battery charging status. The exact battery result is displayed two hours after the vehicle has been parked.
Red: The battery voltage is below 12.4 V. It is definitely time to recharge the battery.
Yellow: The battery voltage is between 12.4 and 12.65 V. It is about time to recharge the battery.
Green: The battery voltage is above 12.65 V. OK! No need to charge.
CTEK Quick contact cable
Part no.:50788022
- Version:
- Approx. length 400 mm, with 2 ring eyelets M10
CTEK Multi-clamp cable
Part no.:50788023
- Version:
- Length approx. 400 mm, with battery clamps
CTEK Extension cable
Part no.:50788024
- Version:
- Comfort Connect, length approx. 2500 mm
- Version:
- Length approx. 400 mm
- Version:
- Black
suitable for MXS 3.8 and MXS 5.0 - Description:
- CTEK BUMPER
schützt das Gehäuse Ihres CTEK-Ladegeräts vor Stößen und Kratzern.
Der Stoßfänger besteht aus robustem Silikongummi, verleiht Ihrem Ladegerät auf rutschigen Oberflächen zusätzlichen Halt und hat 2 Jahre Garantie.
- Version:
- 3,3 m
- Description:
- Das speziell als Einbaugerät ausgelegte INDICATOR PANEL zeigt den Ladezustand der Batterie anhand einer Ampelsymbolik an. Installieren Sie die Anzeigetafel an gut zugänglicher Stelle, verbinden Sie das Anschlusskabel mit der Batterie und schließen Sie Ihr Ladegerät an die Buchse auf der Anzeigetafel an. Die Anzeigetafel ist mit zwei Kabellängen erhältlich, um das Aufladen so einfach und bequem wie möglich zu gestalten. Das Gerät besitzt eine Garantie von 2 Jahren.
This item cannot be returned or cancelled as it is classed as a special order.
Original spare part numbers are for comparison purposes only. All prices are in €, excl. VAT. Errors reserved. Delivery subject to availability.