Universal engine control
GRANIT Engine control unit CEM 380
For monitoring and protecting irrigation motor pumps. Can be mounted on all stationary motors.
- Type:
- CEM 380
GRANIT Engine control unit CIM 137
For monitoring and protecting irrigation pumps,
for control via app
- Type:
- CIM 137 TPA-200
GRANIT Engine control unit CTR 087/0S
For monitoring and protection, for tractors used for irrigation
- Type:
- CTR 087/0S
- Type:
- CIM 136
- Version:
- With GSM mobile phone control
• It uses an SMS message to indicate that the motor pump is in an alarm state (as soon as a telephone number has been programmed).
• Option to display the motor pump status.
• Option to exclude the pump protection.
• Adjust the working time in minutes.
• Adjust the working pressure.
• Option to start or stop via SMS control commands.
• Option to start, stop and adjust the speed (only in conjunction with the Elcos servomotor) via control commands in real time.
• Controls the diesel engine speed regulator and keeps the system pressure constant (only in conjunction with the Elcos servomotor)
• Controls the water flow in the pipe.
• Clock for programming motor pump start and stop.
• Acceleration and deceleration are automatically adjusted when the pump is started and stopped.
• Frost protection and pressure boosting functions.
• Digital instruments (operating hours counter, oil pressure meter, display for oil and cooling water temperature, timer, pump water pressure meter, fuel level indicator, rev counter, battery voltmeter).
• Automatic motor pump shutdown (in the event of low oil pressure, an excessively high temperature, broken belt, minimum fuel level, available A1, low diesel fuel pressure, low cooling water level, insufficient pump water pressure and pump water overpressure).
GRANIT Engine control unit CEM-190
For monitoring and protecting irrigation pumps
Performs irrigation pump monitoring and control. Complete with water pressure sensor and digital pressure gauge. Enables manual adjustment of the engine speed and stopping in the event of a fault.
- Type:
- CEM-190
GRANIT Engine control unit CEM-196
For monitoring and protecting irrigation pumps
(Complete with GSM/GPRS - UMTS - LTE module)
Performs irrigation pump monitoring and control. Complete with water pressure sensor and digital pressure gauge. Enables manual adjustment of the engine speed and stopping in the event of a fault.
- Thread Ø mm:
- M14 X 1,5
- Type:
- TTAO/402
- Thread Ø mm:
- M10 X 1
- Type:
- TPO/403
GRANIT Fuel level sensor GAR-15/62
Diesel fuel tank float with adjustable height from 150 to 620 mm and equipped with low fuel level contact clamps and fuel level indicator.
- Type:
- GAR-1562